where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
327 views
Technical Discussions
mayo9696
mayo9696
01:07 Oct-11-2007
Ultrasonic Inspection (API 1104)

Sec. 11.4.7.2 of API 1104 Twentieth Edition states that "Manual Ultrasonic weld testing shall be performed at a scanning sensitivity of DAC/TCG reference sensitivety plus 6 db min. All indications that exceed 50% of DAC/TCG screen height shall be evaluated. Evaluation sensitivety for manual ultrasonic weld testing should be DAC/TCG sensitivity plus 6 dB with an evaluation level for all indications at 50% of DAC/TCG screen height.

What I interpret from the above statement is: If an indication is found at the evaluation sensitivety of (6db above the DAC/TCG sensitivety) and that indication exceeds 50% of the DAC/TCG screen hieght this indication shall be evaluted to the acceptance standards given in 9.6.2.

What do you think?



 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window