where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1669 views
Technical Discussions
Nick
Nick
01:07 Oct-04-2007
NDT questions

hi,

i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.

does anyone know where i could get a hold or buy the rights to getting a question sample.

cheers,

Nick


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
06:26 Oct-05-2007
Re: NDT questions
ASNT is one source but am not sure whether they will agree. Let us work together on this ourselves.

Swamy

----------- Start Original Message -----------
: hi,
: i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.
: does anyone know where i could get a hold or buy the rights to getting a question sample.
: cheers,
: Nick
------------ End Original Message ------------




 
 Reply 
 
che simon
Other, ultrasonic thickness operator
Cameroon, Joined Jul 2006, 2

che simon

Other, ultrasonic thickness operator
Cameroon,
Joined Jul 2006
2
05:24 Oct-11-2007
Re: NDT questions
ASNT is the best source but you must seek their permision

----------- Start Original Message -----------
: ASNT is one source but am not sure whether they will agree. Let us work together on this ourselves.
: Swamy
: : hi,
: : i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.
: : does anyone know where i could get a hold or buy the rights to getting a question sample.
: : cheers,
: : Nick
------------ End Original Message ------------




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
08:32 Oct-11-2007
Re: NDT questions
You have my permission to use NDTnet's Q&A:
http://www.ndt.net/wshop/quiz/qz_lst.htm

Just add the note "With permisson of NDT.net -www.ndt.net"

Rolf Diederichs

----------- Start Original Message -----------
: ASNT is the best source but you must seek their permision
: : ASNT is one source but am not sure whether they will agree. Let us work together on this ourselves.
: : Swamy
: : : hi,
: : : i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.
: : : does anyone know where i could get a hold or buy the rights to getting a question sample.
: : : cheers,
: : : Nick
------------ End Original Message ------------




 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 162

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
162
07:10 Oct-12-2007
Re: NDT questions
----------- Start Original Message -----------
: ASNT is the best source but you must seek their permision
: : ASNT is one source but am not sure whether they will agree. Let us work together on this ourselves.
: : Swamy
: : : hi,
: : : i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.
: : : does anyone know where i could get a hold or buy the rights to getting a question sample.
: : : cheers,
: : : Nick
------------ End Original Message ------------

Iowa State University has data banks of questions on several ndt methods. You can ask for an exam and it will generate a test from the data bank, even grade it for you. Look at isu.edu.



 
 Reply 
 
chris s
chris s
02:16 Oct-13-2007
Re: NDT questions
----------- Start Original Message -----------
: : ASNT is the best source but you must seek their permision
: : : ASNT is one source but am not sure whether they will agree. Let us work together on this ourselves.
: : : Swamy
: : : : hi,
: : : : i'm making a website fo NDT trainees/technicians and was thinking of putting a NDT question section in it.
: : : : does anyone know where i could get a hold or buy the rights to getting a question sample.
: : : : cheers,
: : : : Nick
: Iowa State University has data banks of questions on several ndt methods. You can ask for an exam and it will generate a test from the data bank, even grade it for you. Look at isu.edu.
------------ End Original Message ------------

i don't know if it is still avalible, but i once had a program called ETS(educitational training system). it had a couple houndred general knowledge questions in MT, UT, RT, and PT


 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window