where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1272 views
Technical Discussions
gaf
gaf
01:19 Aug-26-1999
Sound velocity in water

Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
01:48 Aug-26-1999
Re: Sound velocity in water

: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

--Tom Nelligan
Panametrics, Inc.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1286

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1286
03:27 Aug-26-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

I have an old copy of the CRC Handbook of Chemistry and Physics. There is a section on sound velocity in it. There is even a special item on velocities for water over 212F (100C)

The source is from Acoustical Society of America volume 31, 1959, J.C.McDade, D.R.Pardue, AL Gedrich and F.Vrataric

It is a long list of temperatures and velocities. I will supply a few but you can get the CRC Handbook from any library. Temp I provide in degrees F and Velocity in m/s

Temp Vel
200 1548
210 1544
220 1538
230 1532
240 1524
250 1516
260 1507
270 1497
280 1487
290 1476
300 1465
At 550 degrees F the velocity they publish is 980m/s

Hope this helps

Ed


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 266

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
266
07:46 Aug-28-1999
Re: Sound velocity in water
:
: : Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

: How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

: --Tom Nelligan
: Panametrics, Inc.

It is really not difficult to measure the sound velocity, unless you don´t need a very high precision (it could be for example important, if you want to measure weak solutions etc.).
For high accuracy measurements you will need equipment with higher time measurement precision as typically used and it could be necessary to compensate the wall effects, diffraction effects etc.

Wieslaw Bicz

Optel (http://www.optel.com.pl)


 
 Reply 
 
chittakorn Polyon
chittakorn Polyon
08:07 Dec-12-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.




 
 Reply 
 
Oscar Fernando Cota Monjaras
Oscar Fernando Cota Monjaras
03:02 Jun-24-2000
cylinder vibrating modes
Hi.

Can anybody give me the formula for calculating the vibrating modes of a cylinder?

Thank you. Oscar Cota


 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window