where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
453 views
Technical Discussions
Yasin Karavacýoðlu
Yasin Karavacýoðlu
03:37 Dec-13-1999
lamb wave prob

Anybody know that where can ý obtain lamb waves probes?
My detectors are Krautkramer USN 52, Krautkramer USD 15


 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
04:41 Dec-13-1999
Re: lamb wave prob
Hi Yasin,
Lamb Waves are generated when you impinge the surface of your part with a conventional wave (typically longitudinal) at the appropriate angle to generate the desired Lamb mode in your part. Therefore, conventional angle beam probes can be used if you select the correct angle and frequency. This selection involves understanding the testpiece geometry and the many possible Lamb modes that can be generated in it. Then you can select the necessary test configuration (probes, frequency, etc.).
It is also possible to use variable angle probes having broad bandwidth so that many modes can be generated by changing angle and frequency content.
More recently, phased array probes are being used to select modes electronically.
But, once again, your first step is stating your test piece and flaw geometries.
Regards,
Paul

: Anybody know that where can ý obtain lamb waves probes?
: My detectors are Krautkramer USN 52, Krautkramer USD 15




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window