where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
589 views
Technical Discussions
Tiah Nam Kuan Paul
NDT Inspector
Singapore, Joined Jan 2000, 5

Tiah Nam Kuan Paul

NDT Inspector
Singapore,
Joined Jan 2000
5
04:02 Jan-04-2000
Beam spread


Is it required to do a check on beam spread periodically?


 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
03:23 Jan-05-2000
Re: Beam spread
:
: Is it required to do a check on beam spread periodically?

Recalling the ASME Code, it was required when you were to size a flaw. Currently flaw sizing using Time of Flight (TOF) methods and Creeping Wave methods this is no longer required.

Generally, when using a dB drop flaw sizing method you tend to size the beam spread when the flaw is smaller than the beam spread.




 
 Reply 
 
andy cunningham
andy cunningham
05:13 Feb-16-2000
Re: Beam spread
: dont just read, think. sound will propagate through a medium as a hemisphere regardless of wavelength. the so called beam spread is the use of 3 angles of different intensities. tofd would not work if you think of sound as a beam. as i said before read think and understand. dont be mindless and regurgitate someone elses miscomprehension
does that answer your question (no)
yes do the checks to keep to the requirments 0f a quality system.
: Is it required to do a check on beam spread periodically?
all the best acc




 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window