where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
1084 views
Technical Discussions
Pankaj Joshi
NDT Inspector
Indian Petrochemicals Corporation Ltd, India, Joined Jan 2005, 2

Pankaj Joshi

NDT Inspector
Indian Petrochemicals Corporation Ltd,
India,
Joined Jan 2005
2
06:33 Dec-28-2007
PQR

I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
Can any one help me for that ?

Pankaj Joshi


    
 
 Reply 
 
chris s
chris s
07:23 Dec-28-2007
Re: PQR
----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------

asme IX would be the best place to start


    
 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1268

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1268
09:56 Dec-28-2007
Re: PQR
Pankaj, PQR abbreviates Procedure Qualification Records and relates to WELDING and not NDT. Why is your question posted on the NDT.net forum?

I believe that Nigel Armstrong has already today pointed out that "This is an NDT forum, members cannot be expected to have sound knowledge of Code welding rules."
I suggest you look for Welding forums for answers to your's and similar questions


----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------




    
 
 Reply 
 
G.Madhesan
Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY, Turkey, Joined Nov 2004, 10

G.Madhesan

Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY,
Turkey,
Joined Nov 2004
10
04:48 Dec-29-2007
Re: PQR
You may refer the ASME Sec. IX QW420 and 422.You can get all informations for your PQR.This is the best way.

---------- Start Original Message -----------
: : I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: : Can any one help me for that ?
: : Pankaj Joshi
: asme IX would be the best place to start
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window