where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1194 views
Technical Discussions
Pankaj Joshi
NDT Inspector
Indian Petrochemicals Corporation Ltd, India, Joined Jan 2005, 2

Pankaj Joshi

NDT Inspector
Indian Petrochemicals Corporation Ltd,
India,
Joined Jan 2005
2
06:33 Dec-28-2007
PQR

I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
Can any one help me for that ?

Pankaj Joshi


 
 Reply 
 
chris s
chris s
07:23 Dec-28-2007
Re: PQR
----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------

asme IX would be the best place to start


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
09:56 Dec-28-2007
Re: PQR
Pankaj, PQR abbreviates Procedure Qualification Records and relates to WELDING and not NDT. Why is your question posted on the NDT.net forum?

I believe that Nigel Armstrong has already today pointed out that "This is an NDT forum, members cannot be expected to have sound knowledge of Code welding rules."
I suggest you look for Welding forums for answers to your's and similar questions


----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------




 
 Reply 
 
G.Madhesan
Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY, Turkey, Joined Nov 2004, 10

G.Madhesan

Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY,
Turkey,
Joined Nov 2004
10
04:48 Dec-29-2007
Re: PQR
You may refer the ASME Sec. IX QW420 and 422.You can get all informations for your PQR.This is the best way.

---------- Start Original Message -----------
: : I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: : Can any one help me for that ?
: : Pankaj Joshi
: asme IX would be the best place to start
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window