where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1208 views
Technical Discussions
Pankaj Joshi
NDT Inspector
Indian Petrochemicals Corporation Ltd, India, Joined Jan 2005, 2

Pankaj Joshi

NDT Inspector
Indian Petrochemicals Corporation Ltd,
India,
Joined Jan 2005
2
06:33 Dec-28-2007
PQR

I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
Can any one help me for that ?

Pankaj Joshi


 
 Reply 
 
chris s
chris s
07:23 Dec-28-2007
Re: PQR
----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------

asme IX would be the best place to start


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1307

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1307
09:56 Dec-28-2007
Re: PQR
Pankaj, PQR abbreviates Procedure Qualification Records and relates to WELDING and not NDT. Why is your question posted on the NDT.net forum?

I believe that Nigel Armstrong has already today pointed out that "This is an NDT forum, members cannot be expected to have sound knowledge of Code welding rules."
I suggest you look for Welding forums for answers to your's and similar questions


----------- Start Original Message -----------
: I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: Can any one help me for that ?
: Pankaj Joshi
------------ End Original Message ------------




 
 Reply 
 
G.Madhesan
Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY, Turkey, Joined Nov 2004, 10

G.Madhesan

Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY,
Turkey,
Joined Nov 2004
10
04:48 Dec-29-2007
Re: PQR
You may refer the ASME Sec. IX QW420 and 422.You can get all informations for your PQR.This is the best way.

---------- Start Original Message -----------
: : I am in need of a PQR for ASME SA 387Gr P5 (P NO 5B) covering thickness range of 5.0 to 10.0mm.
: : Can any one help me for that ?
: : Pankaj Joshi
: asme IX would be the best place to start
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window