where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

467 views
Technical Discussions
john
john
01:10 Jan-10-2008
how to design wedge for small diameter pipe inspection

I want to use PA to inspect small diameter pipe, the diameter is 1 inch,the thickness is 5mm,the coder is said for conventional UT use 72degree shear wave and front length must less than 5mm,I want to use 10L16 PA probe,but I don't know how to design a wedge for the inspection.
Anybody like to give me some advice?
Thanks


    
 
 
Michael Moles
, Joined ,
05:05 Jan-11-2008
Re: how to design wedge for small diameter pipe inspection
----------- Start Original Message -----------
: I want to use PA to inspect small diameter pipe, the diameter is 1 inch,the thickness is 5mm,the coder is said for conventional UT use 72degree shear wave and front length must less than 5mm,I want to use 10L16 PA probe,but I don't know how to design a wedge for the inspection.
: Anybody like to give me some advice?
: Thanks
------------ End Original Message ------------
With pleasure. Contact Kirk Rager at Olympus NDT, who designs and builds special wedges. kirk.rager@olympusndt.com.

Yours, Michael Moles.




    
 
 

Product Spotlight

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window