where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

664 views
Technical Discussions
Ashfaq Anwer
Engineering
Engro Chemical , Pakistan, Joined Jul 2007, 1

Ashfaq Anwer

Engineering
Engro Chemical ,
Pakistan,
Joined Jul 2007
1
05:18 Jan-18-2008
Ultrasonic Flaw Detection at High Temperature SS piping weld joints

We intend to perform UFD on SS lines weld joints while in operation (temperature ~ 200 deg C). I need help in identification of hardware (probes), accessories and method of performing UFD on SS weld joints. Anybody having such experience may guide me. I will be grateful.


 
 Reply 
 
UT Roscomm
UT Roscomm
07:52 Jan-24-2008
Re: Ultrasonic Flaw Detection at High Temperature SS piping weld joints
----------- Start Original Message -----------
: We intend to perform UFD on SS lines weld joints while in operation (temperature ~ 200 deg C). I need help in identification of hardware (probes), accessories and method of performing UFD on SS weld joints. Anybody having such experience may guide me. I will be grateful.
------------ End Original Message ------------

You cannot do it with any reliability due the the interface between the weld and parent metal.


 
 Reply 
 
Collin Maloney
NDT Inspector, - Plant Inspector
Applus RTD, Australia, Joined Nov 2000, 147

Collin Maloney

NDT Inspector, - Plant Inspector
Applus RTD,
Australia,
Joined Nov 2000
147
06:38 Feb-23-2008
Re: Ultrasonic Flaw Detection at High Temperature SS piping weld joints
----------- Start Original Message -----------
: : We intend to perform UFD on SS lines weld joints while in operation (temperature ~ 200 deg C). I need help in identification of hardware (probes), accessories and method of performing UFD on SS weld joints. Anybody having such experience may guide me. I will be grateful.
: You cannot do it with any reliability due the the interface between the weld and parent metal.
------------ End Original Message ------------

UFD of SS welds has been around for some time, see the IIW guide circa 1986. The testing at temperatures you are quoting, to my knowlege, is not possible. This is due to the probe design not able to withstand anything other than room temperature.



 
 Reply 
 

Product Spotlight

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window