where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1416 views
Technical Discussions
Alexopoulos Nikolaos
Alexopoulos Nikolaos
07:32 Jan-26-2001
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

: <: ECW
: Mr. Boyer
: Le Chene Rond
: F-91570 Biévres
: phone: 1-69 41 80 20
: email: ecw@wanadoo.fr




    
 
 Reply 
 
MARIE, Redwane
MARIE, Redwane
03:09 Jan-10-2000
acoustic methods to control fatigue in aluminium

I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
Thank you for your answer.


    
 
 Reply 
 
Jens Forker
Jens Forker
04:03 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.

<ECW
Mr. Boyer
Le Chene Rond
F-91570 Biévres
phone: 1-69 41 80 20
email: ecw@wanadoo.fr


    
 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 302

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
302
06:06 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.


Hallo,
My company specialises in using Ultrasonic and Acoustic Resonance methods to inspect components and structures.
The resonances of a component depend upon the material properties, and these are changed with fatigue.
Please see our web site also for more details. This is
www.hands-ndt.co.uk.

Godfrey Hands



    
 
 Reply 
 
Athanassios Anastassopoulos
Athanassios Anastassopoulos
02:29 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.




    
 
 Reply 
 
Athanassios Anastassopoulos
Director,
Mistras Group, Greece, Joined Jan 2000, 14

Athanassios Anastassopoulos

Director,
Mistras Group,
Greece,
Joined Jan 2000
14
02:37 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

Low price some times means reduced performance or capabilities. In order to propose a system or method it is essential to know your needs (fatigue experimental set-up, fatigue frequency,specific interest on onset of crack initiation, location or not, Dt front end filtering requirements etc.). A variety of systems are available from PAC (Web Page www.pacndt.com), ranging from simple low cost university packages to large industrial systems.
Please let us know more about your application and needs.




    
 
 Reply 
 
guilherme veloso
guilherme veloso
01:26 May-11-2002
Re: acoustic methods to control fatigue in aluminium
please send reprint this article

thank you


    
 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window