where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1407 views
Technical Discussions
Alexopoulos Nikolaos
Alexopoulos Nikolaos
07:32 Jan-26-2001
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

: <: ECW
: Mr. Boyer
: Le Chene Rond
: F-91570 Biévres
: phone: 1-69 41 80 20
: email: ecw@wanadoo.fr




    
 
 Reply 
 
MARIE, Redwane
MARIE, Redwane
03:09 Jan-10-2000
acoustic methods to control fatigue in aluminium

I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
Thank you for your answer.


    
 
 Reply 
 
Jens Forker
Jens Forker
04:03 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.

<ECW
Mr. Boyer
Le Chene Rond
F-91570 Biévres
phone: 1-69 41 80 20
email: ecw@wanadoo.fr


    
 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 302

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
302
06:06 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.


Hallo,
My company specialises in using Ultrasonic and Acoustic Resonance methods to inspect components and structures.
The resonances of a component depend upon the material properties, and these are changed with fatigue.
Please see our web site also for more details. This is
www.hands-ndt.co.uk.

Godfrey Hands



    
 
 Reply 
 
Athanassios Anastassopoulos
Athanassios Anastassopoulos
02:29 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.




    
 
 Reply 
 
Athanassios Anastassopoulos
Director,
Mistras Group, Greece, Joined Jan 2000, 14

Athanassios Anastassopoulos

Director,
Mistras Group,
Greece,
Joined Jan 2000
14
02:37 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

Low price some times means reduced performance or capabilities. In order to propose a system or method it is essential to know your needs (fatigue experimental set-up, fatigue frequency,specific interest on onset of crack initiation, location or not, Dt front end filtering requirements etc.). A variety of systems are available from PAC (Web Page www.pacndt.com), ranging from simple low cost university packages to large industrial systems.
Please let us know more about your application and needs.




    
 
 Reply 
 
guilherme veloso
guilherme veloso
01:26 May-11-2002
Re: acoustic methods to control fatigue in aluminium
please send reprint this article

thank you


    
 
 Reply 
 

Product Spotlight

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window