where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1272 views
Technical Discussions
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
07:34 Jan-04-2000
Distance learning courses (NDT)

Anybody know of institutions offering NDT courses via distance learning, degree or anything else?

Kind Regards

Michael Trinidad


 
 Reply 
 
Thomas F. Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Thomas F. Murphy

NDT Inspector
USA,
Joined Jul 2000
16
03:43 Jan-13-2000
Re: Distance learning courses (NDT)
Yes,

Try the link below. I offer no endorsement, just saw it recently on their web page.

Regards,
Tom

: Anybody know of institutions offering NDT courses via distance learning, degree or anything else?

: Kind Regards

: Michael Trinidad




 
 Reply 
 
Thomas F. Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Thomas F. Murphy

NDT Inspector
USA,
Joined Jul 2000
16
03:45 Jan-13-2000
Re: Distance learning courses (NDT)
Yes,
Sorry for double post, I don't think the link came through try th URL www.mri.on.ca. I offer no endorsement, just saw it recently on their web page.

Regards,
Tom

: Anybody know of institutions offering NDT courses via distance learning, degree or anything else?

: Kind Regards

: Michael Trinidad




 
 Reply 
 
Ted Zimmerman
Ted Zimmerman
00:58 Feb-14-2000
Re: Distance learning courses (NDT)
Try going to the web sight www.mv.cc.il.us/nde




 
 Reply 
 
William Friedman
R & D,
Lockheed Martin, USA, Joined Nov 1998, 6

William Friedman

R & D,
Lockheed Martin,
USA,
Joined Nov 1998
6
08:10 Feb-16-2000
Re: Distance learning courses (NDT)
: Anybody know of institutions offering NDT courses via distance learning, degree or anything else?

: Kind Regards

: Michael Trinidad

The NDE Center at Iowa State University is considering offering a distance learning NDT course. Contact Prof. Joe Grey.




 
 Reply 
 
yoyo
yoyo
05:05 Jun-10-2001
Re: Distance learning courses
Hi,
I like to study motorcycle or auto mechanic from my home ( Home study ).
please inform me if you know that

thanking you


 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window