where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

941 views
Technical Discussions
Azarov N.T.
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

Azarov N.T.

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
01:22 Jan-18-2000
About materials testing with impact loading


RE: Materials testing with impact loading.
Posted by: Sergei Tsarik , E-mail: sergei.v.tsarik@usa.net, on August 08, 1999 at 10:49:16 :
Hello!
We have developed and have introduced an impact audio method and instrument AUD-01 for a control of strength of wood-shaving plates. I direct to you the prospectus of the instrument.The audio impact flaw detector AUD-01:

The flaw detector is intended for a nondestructive testing of products from nonmetallic materials: aviation constructions from composite materials, wood-shaving plates, plywood and other bonded constructions from wood. Detected imperfections(flaws) - disbond, stratification.
The instrument allows also to inspect by a nondestructive method strength on curving of products from nonmetallic materials, for example, fiberglass, plywood, wood-shaving plates.
In the instrument the audio impact method of a is realized. Difference of the given instrument is the simultaneous registration at once of two parameters of raised impact impulse of free oscillations of the plating: amplitudes "A" and frequency (period " Ò "). It essentially increases a reliability of a control. An apart from it the instrument is small-size, and has both network, and battery power supply.
The instrument has two operational modes: single measurements in isolated points of an inspected product; measurement in separate zones - in 10 points, about representation on indicators of average value of parameters "A" and "Ò" in the given zone. The second method is used for a control strength of the characteristics of products from nonmetallic materials.
The instrument is introduced in production of wood-shaving plates (Russia).

Technical characteristics of the instrument.

Method of energization of oscillations - impact.
Frequency of impacts, Hz - 10-20.
Range of analyzable frequencies, êÃö - 5-500.
Analyzable parameters - amplitude, own frequency of oscillations, fading.
The type of a converter an agent of oscillations of mechanical,impact operation, receiver - piezoelectric.
Indication of data - 2 digital liquid-crystal indicators: amplitudes "" and period "Ò" of oscillations, fading - on the oscillograph connected to an output(exit) of the instrument: single and average value of the inspected parameter on an inspected zone of a product.
Structure of the instrument - electronic block, power supply unit, audio converter.
Power supply of the instrument - battery (9V) and network.
Dimensions, mm - 200x120x180 (electronic block). A mass - 1,5kg (common).


Contact telephones: Moscow, (095) 436-72-72; 391-54-39, Azarov N.T.





 
 Reply 
 
Azarov N.T.
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

Azarov N.T.

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
01:24 Jan-18-2000
Re: About materials testing with impact loading
meters of raised impact impulse of free oscillations of the plating: amplitudes "A" and frequency (period " Ò "). It essentially increases a reliability of a control. An apart from it the instrument is small-size, and has both network, and battery power supply.
: The instrument has two operational modes: single measurements in isolated points of an inspected product; measurement in separate zones - in 10 points, about representation on indicators of average value of parameters "A" and "Ò" in the given zone. The second method is used for a control strength of the characteristics of products from nonmetallic materials.
: The instrument is introduced in production of wood-shaving plates (Russia).

: Technical characteristics of the instrument.

: Method of energization of oscillations - impact.
: Frequency of impacts, Hz - 10-20.
: Range of analyzable frequencies, êÃö - 5-500.
: Analyzable parameters - amplitude, own frequency of oscillations, fading.
: The type of a converter an agent of oscillations of mechanical, impact operation, receiver - piezoelectric.
: Indication of data - 2 digital liquid-crystal indicators: amplitudes "" and period "Ò" of oscillations, fading - on the oscillograph connected to an output(exit) of the instrument: single and average value of the inspected parameter on an inspected zone of a product.
: Structure of the instrument - electronic block, power supply unit, audio converter.
: Power supply of the instrument - battery (9V) and network.
: Dimensions, mm - 200x120x180 (electronic block). A mass - 1,5kg (common).

:
: Contact telephones: Moscow, (095) 436-72-72; 391-54-39, Azarov N.T.





 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window