where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
909 views
Technical Discussions
Azarov N.T.
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

Azarov N.T.

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
01:22 Jan-18-2000
About materials testing with impact loading


RE: Materials testing with impact loading.
Posted by: Sergei Tsarik , E-mail: sergei.v.tsarik@usa.net, on August 08, 1999 at 10:49:16 :
Hello!
We have developed and have introduced an impact audio method and instrument AUD-01 for a control of strength of wood-shaving plates. I direct to you the prospectus of the instrument.The audio impact flaw detector AUD-01:

The flaw detector is intended for a nondestructive testing of products from nonmetallic materials: aviation constructions from composite materials, wood-shaving plates, plywood and other bonded constructions from wood. Detected imperfections(flaws) - disbond, stratification.
The instrument allows also to inspect by a nondestructive method strength on curving of products from nonmetallic materials, for example, fiberglass, plywood, wood-shaving plates.
In the instrument the audio impact method of a is realized. Difference of the given instrument is the simultaneous registration at once of two parameters of raised impact impulse of free oscillations of the plating: amplitudes "A" and frequency (period " Ò "). It essentially increases a reliability of a control. An apart from it the instrument is small-size, and has both network, and battery power supply.
The instrument has two operational modes: single measurements in isolated points of an inspected product; measurement in separate zones - in 10 points, about representation on indicators of average value of parameters "A" and "Ò" in the given zone. The second method is used for a control strength of the characteristics of products from nonmetallic materials.
The instrument is introduced in production of wood-shaving plates (Russia).

Technical characteristics of the instrument.

Method of energization of oscillations - impact.
Frequency of impacts, Hz - 10-20.
Range of analyzable frequencies, êÃö - 5-500.
Analyzable parameters - amplitude, own frequency of oscillations, fading.
The type of a converter an agent of oscillations of mechanical,impact operation, receiver - piezoelectric.
Indication of data - 2 digital liquid-crystal indicators: amplitudes "" and period "Ò" of oscillations, fading - on the oscillograph connected to an output(exit) of the instrument: single and average value of the inspected parameter on an inspected zone of a product.
Structure of the instrument - electronic block, power supply unit, audio converter.
Power supply of the instrument - battery (9V) and network.
Dimensions, mm - 200x120x180 (electronic block). A mass - 1,5kg (common).


Contact telephones: Moscow, (095) 436-72-72; 391-54-39, Azarov N.T.





 
 Reply 
 
Azarov N.T.
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

Azarov N.T.

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
01:24 Jan-18-2000
Re: About materials testing with impact loading
meters of raised impact impulse of free oscillations of the plating: amplitudes "A" and frequency (period " Ò "). It essentially increases a reliability of a control. An apart from it the instrument is small-size, and has both network, and battery power supply.
: The instrument has two operational modes: single measurements in isolated points of an inspected product; measurement in separate zones - in 10 points, about representation on indicators of average value of parameters "A" and "Ò" in the given zone. The second method is used for a control strength of the characteristics of products from nonmetallic materials.
: The instrument is introduced in production of wood-shaving plates (Russia).

: Technical characteristics of the instrument.

: Method of energization of oscillations - impact.
: Frequency of impacts, Hz - 10-20.
: Range of analyzable frequencies, êÃö - 5-500.
: Analyzable parameters - amplitude, own frequency of oscillations, fading.
: The type of a converter an agent of oscillations of mechanical, impact operation, receiver - piezoelectric.
: Indication of data - 2 digital liquid-crystal indicators: amplitudes "" and period "Ò" of oscillations, fading - on the oscillograph connected to an output(exit) of the instrument: single and average value of the inspected parameter on an inspected zone of a product.
: Structure of the instrument - electronic block, power supply unit, audio converter.
: Power supply of the instrument - battery (9V) and network.
: Dimensions, mm - 200x120x180 (electronic block). A mass - 1,5kg (common).

:
: Contact telephones: Moscow, (095) 436-72-72; 391-54-39, Azarov N.T.





 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window