where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2252 views
Technical Discussions
Devian Zikri
Devian Zikri
07:17 Jan-19-2000
need info

Hi, I am from one of the NDT company in Indonesia looking for this following
X-Ray equipment (audrey Smart Portable X-Ray), can someone give me some input :
-Control Unit tipe Smart 583
-Xray tube head tipe smart 225

All the help will be greatly appreciated.
Thanks


 
 Reply 
 
Mike Bell
NDT Inspector
Materiaal Metingen Holland, Netherlands, Joined Oct 1999, 2

Mike Bell

NDT Inspector
Materiaal Metingen Holland,
Netherlands,
Joined Oct 1999
2
05:57 Jan-19-2000
Re: need info
: Hi, I am from one of the NDT company in Indonesia looking for this following
: X-Ray equipment (audrey Smart Portable X-Ray), can someone give me some input :
: -Control Unit tipe Smart 583
: -Xray tube head tipe smart 225

: All the help will be greatly appreciated.
: Thanks


The name of the equipment is Andrex Smart. They have portable X-Ray sets from 160Kv to 300Kv.
Andrex have a website: www.andrex.dk

Speaking from personal experience, our company NDT technicians always take the Andrex Smart equipment first when they have a site job to do!
Draw your own conclusions.

Good luck
Mike Bell




 
 Reply 
 
Rod Martin
Sales,
NDT Equipment Sales Pty Limited, Australia, Joined Oct 1999, 10

Rod Martin

Sales,
NDT Equipment Sales Pty Limited,
Australia,
Joined Oct 1999
10
04:59 Feb-08-2000
Re: need info

We can offer the Lorad LPX-200. This is a constant potential X-ray unit, self-rectified equal to 270kV.

100% duty cycle
1.5mm focal spot
metal ceramic tube
Control weight 34lbs, tubehead weight 41lbs
The Lorad is made in USA and we have many user customers in Australia. Price is UDS$31,250.00

Regards

Rod Martin
: Hi, I am from one of the NDT company in Indonesia looking for this following
: X-Ray equipment (audrey Smart Portable X-Ray), can someone give me some input :
: -Control Unit tipe Smart 583
: -Xray tube head tipe smart 225

: All the help will be greatly appreciated.
: Thanks




 
 Reply 
 
ikno,Lee
ikno,Lee
06:17 Feb-08-2000
Re: need info
Dear,
Maybe you can find that information at http://www.all-info.net


 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window