where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS.
872 views
Technical Discussions
Yossi Shoef
NDT Inspector
Gabi Shoef Ltd, Israel, Joined Dec 2005, 19

Yossi Shoef

NDT Inspector
Gabi Shoef Ltd,
Israel,
Joined Dec 2005
19
03:40 Feb-07-2008
thickness for annular plates

Does anyone know of a technique to measure the thickness of the annular plates in Aboveground Storage Tank within the critical zone (3") when entry to the tank can not be gained?


 
 Reply 
 
burhanudin sudharmin
Engineering, Reliability and Integrity Eng
Shell Malaysia Trading, Malaysia, Joined Jan 2008, 54

burhanudin sudharmin

Engineering, Reliability and Integrity Eng
Shell Malaysia Trading,
Malaysia,
Joined Jan 2008
54
05:36 Feb-07-2008
Re: thickness for annular plates
The use of PEC (pulse eddy current) was initiated some years ago if I can recall it correctly. The probe is placed on the outer section of the annular plate and the signal transmitted will register thickness readings within the critical zone.

----------- Start Original Message -----------
: Does anyone know of a technique to measure the thickness of the annular plates in Aboveground Storage Tank within the critical zone (3") when entry to the tank can not be gained?
------------ End Original Message ------------




 
 Reply 
 
Alex McLay
Alex McLay
02:20 Feb-08-2008
Re: thickness for annular plates
--It is possible to use the PEC system with a thin transducer.

--------- Start Original Message -----------
: Does anyone know of a technique to measure the thickness of the annular plates in Aboveground Storage Tank within the critical zone (3") when entry to the tank can not be gained?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window