where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1108 views
Technical Discussions
Dwight Whitwell
Teacher, -
Amarillo College, USA, Joined Feb 2008, 2

Dwight Whitwell

Teacher, -
Amarillo College,
USA,
Joined Feb 2008
2
03:20 Feb-15-2008
Automation/Sperry US454

Amarillo College has an Automation US454 c-scan immersion scanner which we would like to upgrade. It seems that paper for the pen recorder is hard to obtain, so we would like to record scans on a PC. Can anyone provide guidance for attaching motion encoders or potentiometers.? We could also use recommendations for PC software. For flaw detectors, we can supply Epoch 2002s with analoge gate output, or newer Krautkramer USM 58 or Panametrics units. Since this is not a corporate sponsored project, we are looking to do this upgrade ourselves, rather than purchasing a commercial solution.


 
 Reply 
 
Phil Thayer
Phil Thayer
06:53 Feb-16-2008
Re: Automation/Sperry US454
Hello Dwight, NDT-Automation has performed many full digital C-Scan upgrades on AI systems like yours. I
notice you stated you would like to do some of the upgrade yourself? We can assist you.

Phil Thayer
NDTA 609-716-4051

ndtautomation.com


----------- Start Original Message -----------
: Amarillo College has an Automation US454 c-scan immersion scanner which we would like to upgrade. It seems that paper for the pen recorder is hard to obtain, so we would like to record scans on a PC. Can anyone provide guidance for attaching motion encoders or potentiometers.? We could also use recommendations for PC software. For flaw detectors, we can supply Epoch 2002s with analoge gate output, or newer Krautkramer USM 58 or Panametrics units. Since this is not a corporate sponsored project, we are looking to do this upgrade ourselves, rather than purchasing a commercial solution.
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
03:02 Feb-18-2008
Re: Automation/Sperry US454
I would strongly recommend the Winspect software from UTEX (www.utex.com)

We have sold a few of these in the UK, and used it to upgrade an old electro sensitive paper tank of our own.


Assuming the old sperry tank uses stepper motors and the power supply / driver amplifiers (may need some work here on some older systems) are in good shape all you should need is

PC - Dual monitors recoomended

Winspect software

Motion control card - Galil or similar

A/D card - National Instruments recommended.


Any of the Flaw Detectors should work, but all will probably have a fairly slow update rate - Less of an issue if you are not doing 'production' work so can keep the speed down.

When this becomes an issue we'd happily sell you one of our Masterscan Flaw Detectors, which are much faster..

Good luck

Joe


----------- Start Original Message -----------
: Amarillo College has an Automation US454 c-scan immersion scanner which we would like to upgrade. It seems that paper for the pen recorder is hard to obtain, so we would like to record scans on a PC. Can anyone provide guidance for attaching motion encoders or potentiometers.? We could also use recommendations for PC software. For flaw detectors, we can supply Epoch 2002s with analoge gate output, or newer Krautkramer USM 58 or Panametrics units. Since this is not a corporate sponsored project, we are looking to do this upgrade ourselves, rather than purchasing a commercial solution.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window