where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
764 views
Technical Discussions
Azhar
NDT Engineer
Panama, Joined May 2006, 17

Azhar

NDT Engineer
Panama,
Joined May 2006
17
00:17 Feb-17-2008
Information redarding Material

During the NDT inspection of a pump shaft key I rejected the key due to cracking. The material of the key was A276 - 316. Now to machine a new key material 316 is not available
My question is that can we use SS 316L, 304, or 304L instead of SS316 or what is the better alternate.

Thanks & Regards
Muhammad Azhar Jamil Khan



 
 Reply 
 
Collin Maloney
NDT Inspector, - Plant Inspector
Applus RTD, Australia, Joined Nov 2000, 147

Collin Maloney

NDT Inspector, - Plant Inspector
Applus RTD,
Australia,
Joined Nov 2000
147
06:19 Feb-23-2008
Re: Information redarding Material
----------- Start Original Message -----------
: During the NDT inspection of a pump shaft key I rejected the key due to cracking. The material of the key was A276 - 316. Now to machine a new key material 316 is not available
: My question is that can we use SS 316L, 304, or 304L instead of SS316 or what is the better alternate.
:
: Thanks & Regards
: Muhammad Azhar Jamil Khan
------------ End Original Message ------------

Azhar
The info you have quoted is for 316 S/Steel bar stock. I would suggest that you need to find out the shear strength for A276-316 and find a comparable material on that basis. I think that you will find that 316 plate is Ok!


 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window