where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
1584 views
Technical Discussions
Ahtram
Sales
Sanco, United Arab Emirates (UAE), Joined Jan 2008, 4

Ahtram

Sales
Sanco,
United Arab Emirates (UAE),
Joined Jan 2008
4
09:38 Feb-10-2008
Which one is the best NDT/PMI metal analyser?

I am assuming most of you guys have used NDT metal analysers from Niton, Oxford Instruments and Innovex.

So would anyone like to share there experience with the metal analysers mentioned above?

Which one you think is the best and why?




 
 Reply 
 
burhanudin sudharmin
Engineering, Reliability and Integrity Eng
Shell Malaysia Trading, Malaysia, Joined Jan 2008, 54

burhanudin sudharmin

Engineering, Reliability and Integrity Eng
Shell Malaysia Trading,
Malaysia,
Joined Jan 2008
54
05:17 Feb-11-2008
Re: Which one is the best NDT/PMI metal analyser?
Which one is the best, is quite subjective to one's need and requirements.
Just to share, I have experience in the use of the Texas Instruments Alloy Analyser. Its however, limited to identifying alloys only. The other downside is the use of radioactive isotopes which requires replacement in about 5 years due to its half life, and maintenance upkeep could be expensive.

----------- Start Original Message -----------
: I am assuming most of you guys have used NDT metal analysers from Niton, Oxford Instruments and Innovex.
: So would anyone like to share there experience with the metal analysers mentioned above?
: Which one you think is the best and why?
------------ End Original Message ------------




 
 Reply 
 
ahtram
Sales
Sanco, United Arab Emirates (UAE), Joined Jan 2008, 4

ahtram

Sales
Sanco,
United Arab Emirates (UAE),
Joined Jan 2008
4
01:22 Feb-13-2008
Re: Which one is the best NDT/PMI metal analyser?
----------- Start Original Message -----------
: Which one is the best, is quite subjective to one's need and requirements.
: Just to share, I have experience in the use of the Texas Instruments Alloy Analyser. Its however, limited to identifying alloys only. The other downside is the use of radioactive isotopes which requires replacement in about 5 years due to its half life, and maintenance upkeep could be expensive.
: : I am assuming most of you guys have used NDT metal analysers from Niton, Oxford Instruments and Innovex.
: : So would anyone like to share there experience with the metal analysers mentioned above?
: : Which one you think is the best and why?
------------ End Original Message ------------

hmmm thanks burhanudin. Yes I agree with you there is a downside to the use of radioactive isptopes where it requies a replacement. Also I do believe radioactive isotopes happen to be dangerous to humans if humans are exposed to them. Radioactive source is old technology banned in USA and europe. its a shame that companies like Niton sell radioactive source metal analysers in the Middle East where there are no legislations against radioactive source. Maybe in the future there will be.




 
 Reply 
 
mj
mj
04:29 Feb-17-2008
Re: Which one is the best NDT/PMI metal analyser?
----------- Start Original Message -----------
: : Which one is the best, is quite subjective to one's need and requirements.
: : Just to share, I have experience in the use of the Texas Instruments Alloy Analyser. Its however, limited to identifying alloys only. The other downside is the use of radioactive isotopes which requires replacement in about 5 years due to its half life, and maintenance upkeep could be expensive.
: : : I am assuming most of you guys have used NDT metal analysers from Niton, Oxford Instruments and Innovex.
: : : So would anyone like to share there experience with the metal analysers mentioned above?
: : : Which one you think is the best and why?
: hmmm thanks burhanudin. Yes I agree with you there is a downside to the use of radioactive isptopes where it requies a replacement. Also I do believe radioactive isotopes happen to be dangerous to humans if humans are exposed to them. Radioactive source is old technology banned in USA and europe. its a shame that companies like Niton sell radioactive source metal analysers in the Middle East where there are no legislations against radioactive source. Maybe in the future there will be.
------------ End Original Message ------------

if some one don't know about the radiation problems better plz don't talk.... if compare with industrial radiograpy, its very very low... so its not the matter of radiation, its the matter of refilling and limitation of indentification, mean time oxford provide some good equipment with argon to find even carbon and ph., looks nice but the problem there also.... i have 2 oxford equipment. which will brakedown every 6 months or 7 months... to get equipment after repair manufacture usualy take 3-4 months... but quipmentwise ARCMet 930 ( old Mechine0 is good
Thanks


 
 Reply 
 
jason
jason
04:51 Mar-14-2008
Re: Which one is the best NDT/PMI metal analyser?
----------- Start Original Message -----------
: : : Which one is the best, is quite subjective to one's need and requirements.
: : : Just to share, I have experience in the use of the Texas Instruments Alloy Analyser. Its however, limited to identifying alloys only. The other downside is the use of radioactive isotopes which requires replacement in about 5 years due to its half life, and maintenance upkeep could be expensive.
: : : : I am assuming most of you guys have used NDT metal analysers from Niton, Oxford Instruments and Innovex.
: : : : So would anyone like to share there experience with the metal analysers mentioned above?
: : : : Which one you think is the best and why?
: : hmmm thanks burhanudin. Yes I agree with you there is a downside to the use of radioactive isptopes where it requies a replacement. Also I do believe radioactive isotopes happen to be dangerous to humans if humans are exposed to them. Radioactive source is old technology banned in USA and europe. its a shame that companies like Niton sell radioactive source metal analysers in the Middle East where there are no legislations against radioactive source. Maybe in the future there will be.
: if some one don't know about the radiation problems better plz don't talk.... if compare with industrial radiograpy, its very very low... so its not the matter of radiation, its the matter of refilling and limitation of indentification, mean time oxford provide some good equipment with argon to find even carbon and ph., looks nice but the problem there also.... i have 2 oxford equipment. which will brakedown every 6 months or 7 months... to get equipment after repair manufacture usualy take 3-4 months... but quipmentwise ARCMet 930 ( old Mechine0 is good
: Thanks
------------ End Original Message ------------

I used the dual source Nitons for NACE MR0175 certification and weld/parent mat"l alloy composition and was very impressed. Compared to the competition they are small, lightweight and fast. I used them in Alberta, Canada and they performed well in extreme conditions. I would recommend them for field work. I'm not sure if they would be the right tool for a lab environment since I try to stay
out of the lab rat zone.

Cheers



 
 Reply 
 
Aage
Aage
16:04 Mar-11-2009
Re: Which one is the best NDT/PMI metal analyser?
In Reply to jason at 04:51 Mar-14-2008 .

Just a follow up on isotope vs. X-ray tube. Isotopes currently being used have much longer lifetime than those used some years ago. They are now described as "everlasting" having half-life of about 100 years. The Niton XLp818 would be an example of such model.
X-ray tube is more accurate and faster than isotope.
X-ray tube models may be easier to transport (e.g. on planes) than isotope models. The rules for this vary from country to country, also within Europe. I believe some countries do not allow the use of isotopes (e.g. Spain). However, I live in Norway and consider buying an isotope based model due to lifetime and that I will only use it on high alloyed steels, and thus I do not need the increased accuracy of the X-ray tube.

 
 Reply 
 

Product Spotlight

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window