where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
924 views
Technical Discussions
Peter McKibbin
Peter McKibbin
03:52 Jan-26-2000
concrete inspection

Can anyone advise me of methods to inspect concrete lined tanks and pipes. Visual is not a problem but defects which are not readily visible are. It has been suggested that I try low freq UT

Any advise / comments appreciated


 
 Reply 
 
Joseph E. Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph E. Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
00:25 Jan-27-2000
Re: Concrete Inspection
The Lixi Profiler will find defects of concrete lined pipes. The results from this technology is density measurement of the total concrete and the steel of the pipe.


 
 Reply 
 
Jens Forker
Jens Forker
07:10 Jan-27-2000
Re: concrete inspection

: Can anyone advise me of methods to inspect concrete lined tanks and pipes. Visual is not a problem but defects which are not readily visible are. It has been suggested that I try low freq UT

<



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
03:00 Jan-27-2000
Re: concrete inspection
It depends upon what the specific application is and the defects you are considering.

Cement Lined Carbon Steel Piping as commonly used in Firewater systems is commonly a problem with internal cement lining failing at the welded field joints in particular. Many people have had success in finding gross defects by using Infrared Imaging where there is sufficient variation in the internal process fluid and the external temperature. Areas where the cement has broken away show up warmer. It is however a quick search technique, very difficult to quantify damage with and of course you need to pipe surface to be available for inspection.

The Lixi Scope imaging device mentioned by Joe Pascent will of course also do an excellent job and the new version will provide quantification information if calibrated for the application.

Conventional ultrasonic is also commonly used from the non concrete side to look for lack of interface. It can be slow and in some case unreliable. Also is most effective when substantial deterioration has taken place.

If you wnat a more sophisticated inspection for early damage such as disbondment then probably something like the Ultraspec Ultrasonic Spectroscopy System would be best. This uses swept frequencys which can be analysed in real time and provides very good indications of back surface properties at much higher sensitivities. This should clearly show breakdown in bond interface between the base pipe and the lining material.
Concrete lined tanks depends on how much access you have to them and the extent of damage expected. If you can get to the lined side - Infrared Thermography either passive or Pulsed Wave may provide information on disbonding etc. Technique is used often in concrete decking.

If you can get access to the outside (I assume these are typically carbon steel tanks lined with cement for water slops, sewage, seawater etc. If this access is available you may be able to apply an AE test but you have to consider signal path travel , thickness of cement etc. Scanningthe surface with a Neutron Backsactter device might indicate areas of differentiation where water has seeped into structure etc.

Thats as far as my thinking goes.

Regards

John O'Brien



 
 Reply 
 

Product Spotlight

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window