where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON International GmbH
YXLON International - innovative High-Tech-Company with long traditionYXLON International develops, manufactures and markets digital radios ...
1462 views
Technical Discussions
Hamid Ben Wada
Hamid Ben Wada
00:30 Jan-07-2000
Accoustic emission

Were can i find instruments that allows vessel under high pressure inspection by accoustic emission technics.

in conformity with the french norm NF: A09-382-87.

I thank you for your advice.


 
 Reply 
 
Jens Forker
Jens Forker
04:05 Jan-10-2000
Re: Accoustic emission
: Were can i find instruments that allows vessel under high pressure inspection by accoustic emission technics.

: in conformity with the french norm NF: A09-382-87.
:
: I thank you for your advice.

Vallen-SYsteme is a developer and manufacturer of AE-Systems that are used for pressure
vessel tests in many countries in the world, inclusive France (e.g. by CETIM
(Senlis), Instute de Soudure, ECW and more).

Please have a look into our web www.vallen.de and let us know your full address, if you
are intersted in more information. Please give us more information about
your needs.



 
 Reply 
 
Athanassios Anastassopoulos
Director,
Mistras Group, Greece, Joined Jan 2000, 14

Athanassios Anastassopoulos

Director,
Mistras Group,
Greece,
Joined Jan 2000
14
02:23 Jan-13-2000
Re: Accoustic emission
: : Were can i find instruments that allows vessel under high pressure inspection by accoustic emission technics.

: : in conformity with the french norm NF: A09-382-87.
: :
: : I thank you for your advice.

High Pressure inspection requires means increased sensitivity and above all high speed. You have to be sure that you will not miss a single AE hit and at the same time have all the necessary information availlable in real time, i.e. multiple screen ALL updated in Real Time. According to my knowledge Physical Acoustics MISTRAS or the new PCI/DiSP system are the faster systems in the market. For more info, please visit www.pacndt.com. Such systems are used all over the world for F/T services and mainly industries directly involved in inspection of high pressure equipment. For more details you might wish to contact PAC at sales@pacndt.com.


 
 Reply 
 
Jens Forker
Jens Forker
07:26 Jan-13-2000
Re: Accoustic emission
: High Pressure inspection requires means increased sensitivity and above all high speed. You have to be sure that you will not miss a single AE hit and at the same time have all the necessary information availlable in real time, i.e. multiple screen ALL updated in Real Time. According to my knowledge Physical Acoustics MISTRAS or the new PCI/DiSP system are the faster systems in the market. For more info, please visit www.pacndt.com. Such systems are used all over the world for F/T services and mainly industries directly involved in inspection of high pressure equipment. For more details you might wish to contact PAC at sales@pacndt.com.

<<If one gets more than 50 hits/(s * channel), the system is certainly not well adjusted and interesting signals might be overlapped by noise. All modern systems perform over 5000 hits/s which is far beyond what one needs.

More distinctive is state of the art 32-bitwindows-software, helpful location algorithms, the ability to quickly address waveforms of selected hits, and more such features that help to understand the AE phenomena. See our web site at www.vallen.de and look at the descriptions of AMSY4 and VisualAE to see state of the art hardware and software for AE.



 
 Reply 
 
Athanassios Anastassopoulos
Director,
Mistras Group, Greece, Joined Jan 2000, 14

Athanassios Anastassopoulos

Director,
Mistras Group,
Greece,
Joined Jan 2000
14
03:50 Jan-14-2000
Re: Accoustic emission
: : High Pressure inspection requires means increased sensitivity and above all high speed. You have to be sure that you will not miss a single AE hit and at the same time have all the necessary information availlable in real time, i.e. multiple screen ALL updated in Real Time. According to my knowledge Physical Acoustics MISTRAS or the new PCI/DiSP system are the faster systems in the market. For more info, please visit www.pacndt.com. Such systems are used all over the world for F/T services and mainly industries directly involved in inspection of high pressure equipment. For more details you might wish to contact PAC at sales@pacndt.com.

: <<: If one gets more than 50 hits/(s * channel), the system is certainly not well adjusted and interesting signals might be overlapped by noise. All modern systems perform over 5000 hits/s which is far beyond what one needs.

: More distinctive is state of the art 32-bit windows-software, helpful location algorithms, the ability to quickly address waveforms of selected hits, and more such features that help to understand the AE phenomena. See our web site at www.vallen.de and look at the descriptions of AMSY4 and VisualAE to see state of the art hardware and software for AE.

Further to your comment I would like to point out:
Speed is always a distinctive point for the selection of an AE-system for any test and certainly for pressure vessel testing.

As modern practices suggest, good real time planar location is necessary, i.e. you need either to increase the #of channels or work with waveforms. In the first case, for large test of 100channels X 50hits/sec = 5000hits/sec !! Is this speed enough ? Please note that Modern Systems exist with 52channels in a single enclosure (see www.pacndt.com). For the second case (waveforms) you certainly need higher speed even for 10-20channels.

Needless to mention the case of composite pressure vessels, where 50hits/sec/channel or 5000hits/sec for all channels is slow.

Another point is the available information/screens ALL updated in real time.





 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
04:47 Jan-14-2000
NDT Equipment In general was Re: Accoustic emission
To save time and bandwidth can I just say on behalf of all equipment manufacturers that the parameters where our equipment is better than the competition are really important.

And of course if there were (perish the thought!) any where we weren't they wouldn't matter.

L&K to all
Joe

PAC rep says:
According to my knowledge Physical Acoustics MISTRAS or the new PCI/DiSP system are the faster systems in the market. For more info, please visit www.pacndt.com. For more details you might wish to contact PAC at sales@pacndt.com.

Vallen say
Speed is not really a distinctive point for the selection of an AE-system for pressure vessel test.
All modern systems perform over 5000 hits/s which is far beyond what one needs.

More distinctive is state of the art 32-bit windows-software, helpful location algorithms, the ability to quickly address waveforms of selected hits, and more such features that help to understand the AE phenomena. See our web site at www.vallen.de and look at the descriptions of AMSY4 and VisualAE to see state of the art hardware and software for AE.

: Further to your comment I would like to point out:
: Speed is always a distinctive point for the selection of an AE-system for any test and certainly for pressure vessel testing.

: As modern practices suggest, good real time planar location is necessary, i.e. you need either to increase the #of channels or work with waveforms. In the first case, for large test of 100channels X 50hits/sec = 5000hits/sec !! Is this speed enough ? Please note that Modern Systems exist with 52channels in a single enclosure (see www.pacndt.com). For the second case (waveforms) you certainly need higher speed even for 10-20channels.

: Needless to mention the case of composite pressure vessels, where 50hits/sec/channel or 5000hits/sec for all channels is slow.

: Another point is the available information/screens ALL updated in real time.





 
 Reply 
 
Marnix Surgeon
Marnix Surgeon
00:07 Jan-27-2000
Re: NDT Equipment In general was Re: Accoustic emission
Nevertheless, if during a pressure vessel test you are recording 5000 hits/sec, then

a) You'd better run for your life because the thing is going to blow

or

b) Most of the signals you are recording is noise.

And besides, 5000 hits/sec, who is going to meaningfully (stress that word) analyse those ??

Best regards,
Marnix Surgeon



 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window