where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1267 views
Technical Discussions
Chris Boyd
Chris Boyd
00:52 Mar-07-2008
MRI on composites

I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
Thanks in advance,
Chris Boyd


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 303

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
303
09:53 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: Thanks in advance,
: Chris Boyd
------------ End Original Message ------------

Chris,
Is this a misunderstanding of terminology?
There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.

Godfrey Hands




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:05 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : Thanks in advance,
: : Chris Boyd
: Chris,
: Is this a misunderstanding of terminology?
: There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: Godfrey Hands
------------ End Original Message ------------

I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.

Simon Amallraja


 
 Reply 
 
Chris Boyd
Chris Boyd
03:48 Mar-09-2008
Re: MRI on composites
----------- Start Original Message -----------
: : : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : : Thanks in advance,
: : : Chris Boyd
: : Chris,
: : Is this a misunderstanding of terminology?
: : There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: : Godfrey Hands
: I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.
: Simon Amallraja
------------ End Original Message ------------

Thanks to Godfrey andSimon for your help. It sounds like relatively new technology and I'm only new to the game myself. I think that they're pulling the plug on it anyway.
Thank you for your help again.
Chris.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
09:36 Mar-11-2008
Re: MRI on composites
A few years ago, the University of New Brunswick (Canada) did some work using real MRI equipment on composite aircraft structure, go the this URL
http://www.unb.ca/fredericton/science/physics/mri/

And scroll down to year 2005. I do not know if this is still being funded.

Dave.


 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window