where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1269 views
Technical Discussions
Chris Boyd
Chris Boyd
00:52 Mar-07-2008
MRI on composites

I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
Thanks in advance,
Chris Boyd


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 303

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
303
09:53 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: Thanks in advance,
: Chris Boyd
------------ End Original Message ------------

Chris,
Is this a misunderstanding of terminology?
There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.

Godfrey Hands




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:05 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : Thanks in advance,
: : Chris Boyd
: Chris,
: Is this a misunderstanding of terminology?
: There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: Godfrey Hands
------------ End Original Message ------------

I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.

Simon Amallraja


 
 Reply 
 
Chris Boyd
Chris Boyd
03:48 Mar-09-2008
Re: MRI on composites
----------- Start Original Message -----------
: : : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : : Thanks in advance,
: : : Chris Boyd
: : Chris,
: : Is this a misunderstanding of terminology?
: : There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: : Godfrey Hands
: I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.
: Simon Amallraja
------------ End Original Message ------------

Thanks to Godfrey andSimon for your help. It sounds like relatively new technology and I'm only new to the game myself. I think that they're pulling the plug on it anyway.
Thank you for your help again.
Chris.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
09:36 Mar-11-2008
Re: MRI on composites
A few years ago, the University of New Brunswick (Canada) did some work using real MRI equipment on composite aircraft structure, go the this URL
http://www.unb.ca/fredericton/science/physics/mri/

And scroll down to year 2005. I do not know if this is still being funded.

Dave.


 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window