where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1865 views
Technical Discussions
Andre van Vuuren
Andre van Vuuren
04:09 Jan-29-2000
Re Iris Inspection Systems

I am a senior techician / analyst for an Inspection company called "Steel Test". Based in South Africa. We have been active in tube inspection for the last 10 years using various techniques Including "IRIS"

WE have through the years used various Iris systems such as the IRIS 9000 , IRIS ulitima and since 1997 the rd-tech tc5700 system.

Both the IRIS 9000 and IRIS Ulima are great for the back up of remote field results in boiler tube inspections "IF" you know what you looking for. We are currently upgrading the soft ware of our Ulima system but this has not been field tested as yet.

The rd-tech system is a complete stand alone system with all data been recorded during inspection. This can then be reviewed and analysed off line. The system is also compact which aids when traveling . We have customers in Southern Africa, Malasia, and the middle East who only want the rd-tech system used on their boilers and heat exchangers. Special turbines can also purchased from rd-tech for the detecting of cracking of tubes behind the tube sheets. With muliple iris probes in a special shoe we also carry out corrosion mapping on the exterior of super heater tubes .

I have also witnessed the Nurson probe used in cojunction with the rd-tech system with great results in carbon steel tubing heat exchangers as tube "flooding" is not required.

For more information feel free to contact myself or Mr Bill Macmillan at our e-mail address.



 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
08:39 Jan-31-2000
Re: Re Iris Inspection Systems
Dear Andre,

It appears you have a pretty solid background in tube inspection using several different techniques. One method you didn't mention was the Laser-Optic Tube Inspection (LOTIS) technique. You may be surprised to find that this technique has twice the resolution of IRIS with approximately twice the inspection speed.

Recently the Electrical Power Research Institute (EPRI) and the Materials Technology Institute (MTI) finalized a Round Robin study which compared seven techniques (ie LOTIS, TC5700, IRIS, MIZ40, STEELTEST, NERASON and the Eagle 2000). This "round robin" was referred to as "Flaw Detection and Characterization in Heat Exchanger Tubing - MTI Project 123". One section of the exam was titled "Flaw Detection Performance by Damage Form, pp 23". LOTIS' outperformed most of the seven techniques for a)Tube Wear/Thinning, b)TSP Wear, c)Pits and d) LPD Flaws. The LOTIS overall score was 85%. IRIS on the other hand scored 69% overall.

Please let me know if you would like additional information on the LOTIS technique.

Regards,
Richard D. Roberts
QUEST Integrated, Inc.
-------------- Origional Message ---------------
: I am a senior techician / analyst for an Inspection company called "Steel Test". Based in South Africa. We have been active in tube inspection for the last 10 years using various techniques Including "IRIS"

: WE have through the years used various Iris systems such as the IRIS 9000 , IRIS ulitima and since 1997 the rd-tech tc5700 system.
:
: Both the IRIS 9000 and IRIS Ulima are great for the back up of remote field results in boiler tube inspections "IF" you know what you looking for. We are currently upgrading the soft ware of our Ulima system but this has not been field tested as yet.

: The rd-tech system is a complete stand alone system with all data been recorded during inspection. This can then be reviewed and analysed off line. The system is also compact which aids when traveling . We have customers in Southern Africa, Malasia, and the middle East who only want the rd-tech system used on their boilers and heat exchangers. Special turbines can also purchased from rd-tech for the detecting of cracking of tubes behind the tube sheets. With muliple iris probes in a special shoe we also carry out corrosion mapping on the exterior of super heater tubes .

: I have also witnessed the Nurson probe used in cojunction with the rd-tech system with great results in carbon steel tubing heat exchangers as tube "flooding" is not required.

: For more information feel free to contact myself or Mr Bill Macmillan at our e-mail address.




 
 Reply 
 
M.Vanderslik
M.Vanderslik
02:26 Feb-01-2000
Re: Re Iris Inspection Systems
Has anyone heard of an IRIS system which utilises a rotating probe/cable combination instead of a water turbine?


 
 Reply 
 
Jacques Parent
Jacques Parent
04:19 Feb-01-2000
Re: Re Iris Inspection Systems
: Has anyone heard of an IRIS system which utilises a rotating probe/cable combination instead of a water turbine?

It is not strictly IRIS but...
"TRUSTIE" (Tiny Rotating Ultrasonic Tube Inspection Equipment)
Designed, built and marketed by Ontario Power Technologies (OPT)
For more info please contact W.K. (Ken) Chan at ken.chan@oht.hydro.on.ca

Regards
jp




 
 Reply 
 
Anre van Vuuren
Anre van Vuuren
07:15 Feb-01-2000
Re: Re Iris Inspection Systems
: : Has anyone heard of an IRIS system which utilises a rotating probe/cable combination instead of a water turbine?

: NUSON a dutch company offers a d/c motor drive with an encoder. This probe has a water jacket sothat the tubes do not have to be flooded. The Nuson probe can also be used with the RD-tech tc5700.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:03 Feb-01-2000
Re: Re Iris Inspection Systems
Others have covered most of the variants on the market today. The one missing is often described as Iris with Stairrods form a US Comapny Scanning Systems International. This is a shaft driven turbine without the trigger portion of an IRIS water turbine.It offers full 360 Degree covergae of the tube surface.

The system is called Tubescan and you can find details on it at www.scanningsystems.com

Regards


 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window