where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
1277 views
Technical Discussions
Chris Boyd
Chris Boyd
00:52 Mar-07-2008
MRI on composites

I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
Thanks in advance,
Chris Boyd


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 303

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
303
09:53 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: Thanks in advance,
: Chris Boyd
------------ End Original Message ------------

Chris,
Is this a misunderstanding of terminology?
There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.

Godfrey Hands




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:05 Mar-07-2008
Re: MRI on composites
----------- Start Original Message -----------
: : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : Thanks in advance,
: : Chris Boyd
: Chris,
: Is this a misunderstanding of terminology?
: There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: Godfrey Hands
------------ End Original Message ------------

I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.

Simon Amallraja


 
 Reply 
 
Chris Boyd
Chris Boyd
03:48 Mar-09-2008
Re: MRI on composites
----------- Start Original Message -----------
: : : I have been tasked to find an article or any information regarding Magnetic Resonance Imagery on composites, specifically focused on defect measurement. I have been trawling through google results for a while and cant seem to find anything relevant. If anyone out there can help or even give me a bit of advice it would really be appreciated.
: : : Thanks in advance,
: : : Chris Boyd
: : Chris,
: : Is this a misunderstanding of terminology?
: : There are several "RESONANCE" applications within Composite inspection, but I have not come across MRI as a technique on composites. Could however be some applications there, so I would be interested if there are.
: : Godfrey Hands
: I think QNET, GmbH has One Side Access Magnetic Resonance Method Instrument for attenuating materials. Not specifically for Composites. Check up with them. www.qnet.com.
: Simon Amallraja
------------ End Original Message ------------

Thanks to Godfrey andSimon for your help. It sounds like relatively new technology and I'm only new to the game myself. I think that they're pulling the plug on it anyway.
Thank you for your help again.
Chris.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
09:36 Mar-11-2008
Re: MRI on composites
A few years ago, the University of New Brunswick (Canada) did some work using real MRI equipment on composite aircraft structure, go the this URL
http://www.unb.ca/fredericton/science/physics/mri/

And scroll down to year 2005. I do not know if this is still being funded.

Dave.


 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window