where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
1396 views
Technical Discussions
erman katurman
erman katurman
08:22 Mar-18-2008
NDT/ UT

I can not give a decision about which flaw detector should i buy for my company, USM 35X S or DIO-562 LC? I , definetly, know that USM 35X S is better than the other one but the question is " Does it worth?". I mean, while USM 35X S costs something about 14000 Eu, DIO-562 LC costs just the half of it, something about 6100 EU.

Thank You


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:12 Mar-18-2008
Re: NDT/ UT
----------- Start Original Message -----------
: I can not give a decision about which flaw detector should i buy for my company, USM 35X S or DIO-562 LC? I , definetly, know that USM 35X S is better than the other one but the question is " Does it worth?". I mean, while USM 35X S costs something about 14000 Eu, DIO-562 LC costs just the half of it, something about 6100 EU.
: Thank You
------------ End Original Message ------------


The UT instrument to be bought needs to be decided based on several factors including range, power, frequency, linearity, resolution, probes offered and service availability.

Large and established organisations have large overheads too but will support the products better.

Pl. understand that I don't represent any manufacturer.



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
02:38 Mar-18-2008
Re: NDT/ UT
As somebody who does represent a UT manufacturer I would agree entirely - The reason that there are still a lot of companies in business, and that one 'best' company does not particularly dominate is that customers have different needs.

Certainly do not look just at GE and Starmans, consider also ourselves (Sonatest) , Olympus and other companies that are active in your market.

A UT instrument is a fairly sizable investment - you need to make sure that you get the best value for yourself.
key things to consider:

+Instrument technical performance, although if you avoid the cheapest kit, and are not working in very demanding applications, this is much less of an issue than it used to be. All the major manufacturers equipment works well.

+ Backup from manufacturer and local dealer.

+Ease of use - Who will use it and how often. Any instrument is fine if you use it everyday, Once a month is a different matter. (This is an area we're good at, so of course I emphasise it...)

+ Reliability / robustness. Equiment from the better manufacturers should still be working fine after five or more years of typical use. If you are buying the equipment for a specific job, or if its just used in a lab, this is much less of an issue.

As they say, you pays your money and you takes your choice...
Good luck with it

Joe



----------- Start Original Message -----------
: : I can not give a decision about which flaw detector should i buy for my company, USM 35X S or DIO-562 LC? I , definetly, know that USM 35X S is better than the other one but the question is " Does it worth?". I mean, while USM 35X S costs something about 14000 Eu, DIO-562 LC costs just the half of it, something about 6100 EU.
: : Thank You
:
: The UT instrument to be bought needs to be decided based on several factors including range, power, frequency, linearity, resolution, probes offered and service availability.
: Large and established organisations have large overheads too but will support the products better.
: Pl. understand that I don't represent any manufacturer.
------------ End Original Message ------------




 
 Reply 
 
Roberto Falconio
Engineering, NDT/Metrology SUPERVISOR
El Salvador, Joined Feb 2000, 13

Roberto Falconio

Engineering, NDT/Metrology SUPERVISOR
El Salvador,
Joined Feb 2000
13
03:59 Mar-18-2008
Re: NDT/ UT
Hi Erman,
In my opinion you must balance the budget you have for the aqcuisition of an UT equipment with the applications your company is perfroming. Also an important factor is how confortable will the operator be with the equipment operation? I mean will it be friendly to use? if you have to work on higher places will it be easy to handle for example at 30 to 50 m?
You must look forward that it provides you good results in your inspection, you can ask for a demostration of the equipments also, I can't tell you anything about the DIO, I'm not quite familiar with it, but USM is a very nice piece of equipment and it worths! But if you don't have enough budget to have it, you will have to look forward the DIO
Good luck and best regards

----------- Start Original Message -----------
: I can not give a decision about which flaw detector should i buy for my company, USM 35X S or DIO-562 LC? I , definetly, know that USM 35X S is better than the other one but the question is " Does it worth?". Imean, while USM 35X S costs something about 14000 Eu, DIO-562 LC costs just the half of it, something about 6100 EU.
: Thank You
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window