where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1047 views
Technical Discussions
Jean-Claude Schwartz
Jean-Claude Schwartz
06:18 Mar-20-2008
UV - Black light Safety Glasses

We are looking to replace our UV Black light Safety glasses.
We use Labino lamps which can produce 8,500 µw/cm2 and therefore consider these glasses very important from a safety point of view.
Having contacted several companies regarding the supply of glasses (for a wavelength range of 245-365nm) there appears to be a grey area with regards to which glasses are best suited.
Does anyone have any experience regarding this or perhaps some proposals as to the best type of glasses available on the market


    
 
 
Michel
NDT Inspector,
consultant, Canada, Joined Sep 2006, 834

Michel

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
834
00:20 Mar-21-2008
Re: UV - Black light Safety Glasses
----------- Start Original Message -----------
: We are looking to replace our UV Black light Safety glasses.
: We use Labino lamps which can produce 8,500 µw/cm2 and therefore consider these glasses very important from a safety point of view.
: Having contacted several companies regarding the supply of glasses (for a wavelength range of 245-365nm) there appears to be a grey area with regards to which glasses are best suited.
: Does anyone have any experience regarding this or perhaps some proposals as to the best type of glasses available on the market
------------ End Original Message ------------

Hi Jean-Claude,

I'm not sure to what you are getting at! My safety glasses are UV filtered. It can be done when you order your prescription glasses from an eye clinic. I've tested them by placing them between a black light and a light meter. The meter rear zero. So it's a good way to see if you got what you paid for.

As for the Labino, I think you are confusing the wavelength of the black light with the intensity of the light itself. The UV protection in glasses is to cut out the UV radiation, it will not cut down the intensity of the light.

I don't know if it still holds true, I had my PT-MT courses 17 years ago but I was told then that black light are only dangerous if you stare into them and only if the filter is cracked. Otherwise all you will experience is a little discomfort because of the way the UV radiation interact with the liquid inside your eye.

Having said all that; should you wear UV filtered eye protection? Yes. But will the Labino lamp react any differently than the black light that are currently in use at most places still? No.

In closing, remember that UV radiation is radiation and will behave in the same way as any other radiation (X-ray and gamma). Its intensity will decrease to the square of the distance. Speaking of safety, if you work with someone else, it should be mentionned during your prejob briefing. Not to point these lamp in the others face.

Cheerios,
Michel




    
 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window