where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1272 views
Technical Discussions
David Harvey
Engineering
ATI - Wah Chang, USA, Joined Nov 2002, 42

David Harvey

Engineering
ATI - Wah Chang,
USA,
Joined Nov 2002
42
09:44 May-15-2008
Eye Examinations

I am weeding through a number of specifications that deal with eye exams. Some allow the Level III to do the exam, others a "technician", others yet someone "approved by the Level III."

Do we have any specs out there that require a nurse, doctor, or optometrist to do the eye exam?

The reason I ask is that in many locations, medical assistant type folk are used to perform "screening." These are not nurses, doctors, physician's assistants, etc. Do we have any major specifications that pointedly require doctors or nurses to do the exam?


 
 Reply 
 
Ed T.
Ed T.
01:55 May-19-2008
Re: Eye Examinations
First of alll which code are you working to? CP-189, SNT-TC-1a or some other code. That makes a difference.

----------- Start Original Message -----------
: I am weeding through a number of specifications that deal with eye exams. Some allow the Level III to do the exam, others a "technician", others yet someone "approved by the Level III."
: Do we have any specs out there that require a nurse, doctor, or optometrist to do the eye exam?
: The reason I ask is that in many locations, medical assistant type folk are used to perform "screening." These are not nurses, doctors, physician's assistants, etc. Do we have any major specifications that pointedly require doctors or nurses to do the exam?
------------ End Original Message ------------




 
 Reply 
 
David
Engineering
ATI - Wah Chang, USA, Joined Nov 2002, 42

David

Engineering
ATI - Wah Chang,
USA,
Joined Nov 2002
42
05:49 May-19-2008
Re: Eye Examinations
----------- Start Original Message -----------
: First of alll which code are you working to? CP-189, SNT-TC-1a or some other code. That makes a difference.
: : I am weeding through a number of specifications that deal with eye exams. Some allow the Level III to do the exam, others a "technician", others yet someone "approved by the Level III."
: : Do we have any specs out there that require a nurse, doctor, or optometrist to do the eye exam?
: : The reason I ask is that in many locations, medical assistant type folk are used to perform "screening." These are not nurses, doctors, physician's assistants, etc. Do we have any major specifications that pointedly require doctors or nurses to do the exam?
------------ End Original Message ------------

Many different specifications, TC-1A, NAS410, EN473, and more.


 
 Reply 
 
Mohammad Naderi
Mohammad Naderi
05:59 May-24-2008
Re: tofd quize
----------- Start Original Message -----------
: First of alll which code are you working to? CP-189, SNT-
Deare sir
Hi
I want to learn tofd and i want quize please help me]

thanks a lot

mohammad


 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window