where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1795 views
Technical Discussions
Gowri santhosh Palika
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

Gowri santhosh Palika

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
03:01 May-17-2008
Stereo-radiography

Hi
what is stereo radiography? Pls explain me.


 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
03:06 May-19-2008
Re: Stereo-radiography
Stereo radiography:
The production of two radiographs made using a source shift exactluy parallel to the film plane.

This is taken directly for the A-Z section of this site.

----------- Start Original Message -----------
: Hi
: what is stereo radiography? Pls explain me.
------------ End Original Message ------------




 
 Reply 
 
Gowri
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

Gowri

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
00:23 May-19-2008
Re: Stereo-radiography
----------- Start Original Message -----------
: Stereo radiography:
: The production of two radiographs made using a source shift exactluy parallel to the film plane.
: This is taken directly for the A-Z section of this site.
: : Hi
: : what is stereo radiography? Pls explain me.
------------ End Original Message ------------

What are the applications of stereo radiography.


 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
02:19 May-19-2008
Re: Stereo-radiography
Stereo radiography will anable by trigonometric calculation to locate a defect in a part.

Michel

----------- Start Original Message -----------
: : Stereo radiography:
: : The production of two radiographs made using a source shift exactluy parallel to the film plane.
: : This is taken directly for the A-Z section of this site.
: : : Hi
: : : what is stereo radiography? Pls explain me.
: What are the applications of stereo radiography.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window