where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
712 views
Technical Discussions
Azhar Jamil
NDT Engineer
Panama, Joined May 2006, 17

Azhar Jamil

NDT Engineer
Panama,
Joined May 2006
17
08:49 Jun-03-2008
Request for Phased Array Inspection Information

Dear all,

I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.

Thanks & regards
Azhar jamil




 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
06:08 Jun-03-2008
Re: Request for Phased Array Inspection Information
----------- Start Original Message -----------
: Dear all,
: I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.
: Thanks & regards
: Azhar jamil
------------ End Original Message ------------

Azhar:

Contact Peter Ciorau of OPG at peter.ciorau@opg.com.

Michael


 
 Reply 
 
Marius Dinu
Marius Dinu
06:12 Jun-03-2008
Re: Request for Phased Array Inspection Information
Jamil,

General Electric (GE) is a worldwide leader in this inspection. Through its division Life Extension Services, we have performed this inspection on hundreds of units, both fossil and nuclear. If you want more info on that or you want to ask for a quote, please contact our Production Coordinator:

Donald Rubscha
phone: +1 518 385 5274
email: donald1.rubschs@ge.com

Best regards,

Marius Dinu
----------- Start Original Message -----------
: Dear all,
: I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.
: Thanks & regards
: Azhar jamil
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window