where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
715 views
Technical Discussions
Azhar Jamil
NDT Engineer
Panama, Joined May 2006, 17

Azhar Jamil

NDT Engineer
Panama,
Joined May 2006
17
08:49 Jun-03-2008
Request for Phased Array Inspection Information

Dear all,

I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.

Thanks & regards
Azhar jamil




 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
06:08 Jun-03-2008
Re: Request for Phased Array Inspection Information
----------- Start Original Message -----------
: Dear all,
: I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.
: Thanks & regards
: Azhar jamil
------------ End Original Message ------------

Azhar:

Contact Peter Ciorau of OPG at peter.ciorau@opg.com.

Michael


 
 Reply 
 
Marius Dinu
Marius Dinu
06:12 Jun-03-2008
Re: Request for Phased Array Inspection Information
Jamil,

General Electric (GE) is a worldwide leader in this inspection. Through its division Life Extension Services, we have performed this inspection on hundreds of units, both fossil and nuclear. If you want more info on that or you want to ask for a quote, please contact our Production Coordinator:

Donald Rubscha
phone: +1 518 385 5274
email: donald1.rubschs@ge.com

Best regards,

Marius Dinu
----------- Start Original Message -----------
: Dear all,
: I am looking for phased array inspection Phased array inspection of 323MW LP turbine rotor blades roots and disc head at Hub Power Station, Pakistan. Can any one guide me in this regard and provide me contacts of companies which provide the phase array services. You can contact me on the my email address for details.
: Thanks & regards
: Azhar jamil
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window