where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1738 views
Technical Discussions
S.R.G.PRABHU
Consultant, AUT specialist
FREELANCE, India, Joined Aug 2008, 64

S.R.G.PRABHU

Consultant, AUT specialist
FREELANCE,
India,
Joined Aug 2008
64
04:16 Jun-03-2008
EXPLOSION PROOF ENDOSCOPE

Hello,
We want to use an endoscope for our platform shutdown which shall be explosion proof certified as per European norms. Anyone please advise?
Thanks
Prabhu


 
 Reply 
 
Dang Dinh Tuan
Sales, - -
Automation System Integration & Technology Transfer, Vietnam, Joined Nov 2007, 3

Dang Dinh Tuan

Sales, - -
Automation System Integration & Technology Transfer,
Vietnam,
Joined Nov 2007
3
07:41 Jun-03-2008
Re: EXPLOSION PROOF ENDOSCOPE
----------- Start Original Message -----------
: Hello,
: We want to use an endoscope for our platform shutdown which shall be explosion proof certified as per European norms. Anyone please advise?
: Thanks
: Prabhu
------------ End Original Message ------------

Hello,
Please try Olympus new IPLEX FX videoscope system.
Good luck!


 
 Reply 
 
Gary Woodside
NDT Inspector,
Visual Testing Services Ltd., United Kingdom, Joined Feb 2000, 8

Gary Woodside

NDT Inspector,
Visual Testing Services Ltd.,
United Kingdom,
Joined Feb 2000
8
09:58 Jun-04-2008
Re: EXPLOSION PROOF ENDOSCOPE
Endoscopes themselves are not the source of ignition and thus do not need to be certified unless they are videoscopes and have a camera at the tip. The smallest Ex camera on the market will go through a 50mm hole but has no ability to pan or tilt. If you need an endoscope for small access then it is the light source that needs to be certified such as the KLS 4250 or a sceon
Regards
Gary ----------- Start Original Message -----------
: : Hello,
: : We want to use an endoscope for our platform shutdown which shall be explosion proof certified as per European norms. Anyone please advise?
: : Thanks
: : Prabhu
: Hello,
: Please try Olympus new IPLEX FX videoscope system.
: Good luck!
------------ End Original Message ------------




 
 Reply 
 
s.scaramucci
s.scaramucci
06:12 Jun-04-2008
Re: EXPLOSION PROOF ENDOSCOPE

----------- Start Original Message -----------
: Endoscopes themselves are not the source of ignition and thus do not need to be certified unless they are videoscopes and have a camera at the tip. The smallest Ex camera on the market will go through a 50mm hole but has no ability to pan or tilt. If you need an endoscope for small access then it is the light source that needs to be certified such as the KLS 4250 or a sceon
: Regards
: Gary ----------- Start Original Message -----------
: : : Hello,
: : : We want to use an endoscope for our platform shutdown which shall be explosion proof certified as per European norms. Anyone please advise?
: : : Thanks
: : : Prabhu
: : Hello,
: : Please try Olympus new IPLEX FX videoscope system.
: : Good luck!
------------ End Original Message ------------

Hi ! to all.

KLS-4250 it's a very old Olympus KMI Light Sourse model and my be not longer available now.
On my informations, the only one industrial endoscope available actuallywith Exx Certification is maded by the Sholly Co. and is named "Flexylux".

Regards





 
 Reply 
 
Simon Amallraja
Simon Amallraja
09:16 Jun-04-2008
Re: EXPLOSION PROOF ENDOSCOPE
----------- Start Original Message -----------
: Hello,
: We want to use an endoscope for our platform shutdown which shall be explosion proof certified as per European norms. Anyone please advise?
: Thanks
: Prabhu
------------ End Original Message ------------

You can also check up with Instrument Technology (www.scopes.com). They have non conductive fibroscopes. They may help you.

Simon Amallraja



 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window