where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1289 views
Technical Discussions
mj
mj
08:58 Jun-08-2008
CHIME

all my specialist friends... can i get some information of CHIME Rapid screening system. and who's the manufacture, any news about this equipment is highly appricated


 
 Reply 
 
bob sudharmn
Engineering, Reliability and Integrity Eng
Shell Malaysia Trading, Malaysia, Joined Jan 2008, 54

bob sudharmn

Engineering, Reliability and Integrity Eng
Shell Malaysia Trading,
Malaysia,
Joined Jan 2008
54
01:55 Jun-09-2008
Re: CHIME
There is an article on this subject. Refer attached link

http://www.ndt.net/article/ecndt98/chemical/103/103.htm


----------- Start Original Message -----------
: all my specialist friends... can i get some information of CHIME Rapid screening system. and who's the manufacture, any news about this equipment is highly appricated
------------ End Original Message ------------




 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 281

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
281
03:53 Jun-09-2008
Re: CHIME
----------- Start Original Message -----------
: all my specialist friends... can i get some information of CHIME Rapid screening system. and who's the manufacture, any news about this equipment is highly appricated
------------ End Original Message ------------

CHIME is not so much an equipment but a technique based on the correct transducers, wave modes, data display and interpretation. The technique was developed by the HOIS JIP when it was part of AEA Technology. HOIS 2000 is now part of ESR Technology based in Abingdon Oxfordshire.

As indicated in an earlier posting there are published papers on the technique and some of the computer based UT system manufacturers now offer CHIME capabilities.



 
 Reply 
 
mj
mj
08:43 Jun-10-2008
Re: CHIME
Dear Mr. John,
Can you please help me to find out the manufacture for CHIME equipment? is it possible to do chime with Normal Ultrasonic equipment?


----------- Start Original Message -----------
: : all my specialist friends... can i get some information of CHIME Rapid screening system. and who's the manufacture, any news about this equipment is highly appricated
: CHIME is not so much an equipment but a technique based on the correct transducers, wave modes, data display and interpretation. The technique was developed by the HOIS JIP when it was part of AEA Technology. HOIS 2000 is now part of ESR Technology based in Abingdon Oxfordshire.
: As indicated in an earlier posting there are published papers on the technique and some of the computer based UT system manufacturers now offer CHIME capabilities.
------------ End Original Message ------------




 
 Reply 
 
Mark Nel
Mark Nel
03:14 Jun-10-2008
Re: CHIME
Try AGR Field Operations, we supply equipment and software for the CHIME technique. Our Aberdeen and Bergen offices also provide site service using CHIME amongst other NDT services. The data needs to be processed & presented in a computer generated format that would not be possible on conventional flaw detectors.
----------- Start Original Message -----------
: Dear Mr. John,
: Can you please help me to find out the manufacture for CHIME equipment? is it possible to do chime with Normal Ultrasonic equipment?



 
 Reply 
 
Charlie Lawther
Charlie Lawther
02:24 Jun-12-2008
Re: CHIME
CHIME is manufactured by ESR (Was AEA Technology) They could provide you with equipment and a license to use CHIME.

3 companies currently have a license to use this equipment.
----------- Start Original Message -----------
: Try AGR Field Operations, we supply equipment and software for the CHIME technique. Our Aberdeen and Bergen offices also provide site service using CHIME amongst other NDT services. The data needs to be processed & presented in a computer generated format that would not be possible on conventional flaw detectors.
: : Dear Mr. John,
: : Can you please help me to find out the manufacture for CHIME equipment? is it possible to do chime with Normal Ultrasonic equipment?
------------ End Original Message ------------




 
 Reply 
 
RT. Jeyakumar
RT. Jeyakumar
07:59 Jul-09-2008
Re: CHIME
----------- Start Original Message -----------
: all my specialist friends... can i get some information of CHIME Rapid screening system. and who's the manufacture, any news about this equipment is highly appricated
------------ End Original Message ------------

Good day MJ,

Olympus (RD Tech, Canada) is manufacturing equipment with CHIME software. It is user friendly too. It is no other than Olympus multi scan equipment with TOFD, CHIME, Eddy Current (Surface scanning), etc. Hope you're MJ of Malaysia. If so, contact Olympus Singapore. They can help you

Regards,

RT. Jeyakumar


 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window