where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

461 views
Technical Discussions
Kiko
Kiko
03:45 Jul-03-2008
Is 2375 for UT designed to replace 2154?

Is 2375 for UT designed to replace 2154? The step Down UT Standards required for Bar Stock drives cost up for inspecting them. Any other interpetrations that I am missing?



 
 Reply 
 
David Harvey
Engineering
ATI - Wah Chang, USA, Joined Nov 2002, 42

David Harvey

Engineering
ATI - Wah Chang,
USA,
Joined Nov 2002
42
09:45 Jul-03-2008
Re: Is 2375 for UT designed to replace 2154?
The short answer is, yes, it is the document intended by ASTM to replace 2154.

For reference, go here:

http://annex4.astm.org/BroadcastEmailAttachments/MIL_STD_2154_Notice_2_-_Cancellation.pdf


----------- Start Original Message -----------
: Is 2375 for UT designed to replace 2154? The step Down UT Standards required for Bar Stock drives cost up for inspecting them. Any other interpetrations that I am missing?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window