where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
476 views
Technical Discussions
Iridiumman
Iridiumman
04:47 Jul-09-2008
Trending software

I am trying to find some information about trending and life expectancy software packages for boiler and pipelines. Are there any off the shelf packages out there that will take thickness data from the NDT inspection over a period of time and do some trending and predict how the pipes will look like in 6 months?



 
 Reply 
 
Ryan Burns
Ryan Burns
03:56 Jul-11-2008
Re: Trending software
----------- Start Original Message -----------
: I am trying to find some information about trending and life expectancy software packages for boiler and pipelines. Are there any off the shelf packages out there that will take thickness data from the NDT inspection over a period of time and do some trending and predict how the pipes will look like in 6 months?
------------ End Original Message ------------

Iridium,

There are no "off the shelf" software packages that exist to my knowledge. Many trending and life expectancy software suites are available through their proprietary developers, such as UltraPIPE (Berwanger), Visions (Metegrity), and PCMS (Conam), to name a few. While they all have great features and are well worth the cost for a very encompassing and proactive approach to RBI and failure prediction, they are costly. If you are simply looking to predict life expectancy of a few pipelines or boiler tubes, it is quite easy to build an excel spreadsheet using established ST/LTCR calculations found in API 510/570 codes. Hope this helps.

Ryan.



 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window