where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes designs, develops and manufactures nearly 30 years a complete NDT range of products in eddy current and ultrasonic testing methods.
1640 views
Technical Discussions
Anders
Anders
03:09 Jul-22-2008
About Epoch LTC

Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
Thanks.


    
 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:51 Jul-22-2008
Re: About Epoch LTC
The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.

As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.


----------- Start Original Message -----------
: Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: Thanks.
------------ End Original Message ------------




    
 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 522

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
522
07:24 Jul-22-2008
Re: About Epoch LTC
I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...

Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen

Good luck

Joe

---------- Start Original Message -----------
: The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
:
: : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : Thanks.
------------ End Original Message ------------




    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 845

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
845
00:50 Jul-23-2008
Re: About Epoch LTC
Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.

Cheerios,
Michel

----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




    
 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 302

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
302
09:16 Jul-23-2008
Re: About Epoch LTC
In response to Joe's comments, I have had a "short play" with one of these instruments. I agree that the screen is a bit small, but it is designed to be a smaller and more portable version of the Epoch 4 and Epoch XT. If a bigger screen is needed, then the bigger instrument should be chosen.
Having said that, the "up to 50 DAC points" is a lot, but nobody is ever going to use that many.

Godfrey Hands
----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




    
 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:43 Aug-22-2008
Re: About Epoch LTC
----------- Start Original Message -----------
: Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.
: Cheerios,
: Michel
: : I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: : Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: : Good luck
: : Joe
: : ---------- Start Original Message -----------
: : : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: : :
: : : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : : Thanks.
------------ End Original Message ------------

It's a Lefty Revolt! Hide your Children!


    
 
 Reply 
 
Chaitanya Vasanthavada
Chaitanya Vasanthavada
17:26 Nov-15-2014
Re: About Epoch LTC
In Reply to David Hermanutz at 01:43 Aug-22-2008 .

No doubt that Epoch LTC is an excellent machine for UT. I am a bit confused in drawing DAC.
Can you explain the process of it.

    
 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window