where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1695 views
Technical Discussions
Anders
Anders
03:09 Jul-22-2008
About Epoch LTC

Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
Thanks.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:51 Jul-22-2008
Re: About Epoch LTC
The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.

As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.


----------- Start Original Message -----------
: Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
07:24 Jul-22-2008
Re: About Epoch LTC
I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...

Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen

Good luck

Joe

---------- Start Original Message -----------
: The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
:
: : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
00:50 Jul-23-2008
Re: About Epoch LTC
Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.

Cheerios,
Michel

----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
09:16 Jul-23-2008
Re: About Epoch LTC
In response to Joe's comments, I have had a "short play" with one of these instruments. I agree that the screen is a bit small, but it is designed to be a smaller and more portable version of the Epoch 4 and Epoch XT. If a bigger screen is needed, then the bigger instrument should be chosen.
Having said that, the "up to 50 DAC points" is a lot, but nobody is ever going to use that many.

Godfrey Hands
----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:43 Aug-22-2008
Re: About Epoch LTC
----------- Start Original Message -----------
: Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.
: Cheerios,
: Michel
: : I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: : Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: : Good luck
: : Joe
: : ---------- Start Original Message -----------
: : : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: : :
: : : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : : Thanks.
------------ End Original Message ------------

It's a Lefty Revolt! Hide your Children!


 
 Reply 
 
Chaitanya Vasanthavada
Chaitanya Vasanthavada
17:26 Nov-15-2014
Re: About Epoch LTC
In Reply to David Hermanutz at 01:43 Aug-22-2008 .

No doubt that Epoch LTC is an excellent machine for UT. I am a bit confused in drawing DAC.
Can you explain the process of it.

 
 Reply 
 

Product Spotlight

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window