where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Acoustic Emission Consulting, Inc.
Acoustic Emission Consulting, Inc. specializes in the design of small portable AE instruments for field and lab use.
1686 views
Technical Discussions
Anders
Anders
03:09 Jul-22-2008
About Epoch LTC

Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
Thanks.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:51 Jul-22-2008
Re: About Epoch LTC
The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.

As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.


----------- Start Original Message -----------
: Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
07:24 Jul-22-2008
Re: About Epoch LTC
I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...

Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen

Good luck

Joe

---------- Start Original Message -----------
: The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
:
: : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 888

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
888
00:50 Jul-23-2008
Re: About Epoch LTC
Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.

Cheerios,
Michel

----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 305

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
305
09:16 Jul-23-2008
Re: About Epoch LTC
In response to Joe's comments, I have had a "short play" with one of these instruments. I agree that the screen is a bit small, but it is designed to be a smaller and more portable version of the Epoch 4 and Epoch XT. If a bigger screen is needed, then the bigger instrument should be chosen.
Having said that, the "up to 50 DAC points" is a lot, but nobody is ever going to use that many.

Godfrey Hands
----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:43 Aug-22-2008
Re: About Epoch LTC
----------- Start Original Message -----------
: Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.
: Cheerios,
: Michel
: : I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: : Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: : Good luck
: : Joe
: : ---------- Start Original Message -----------
: : : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: : :
: : : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : : Thanks.
------------ End Original Message ------------

It's a Lefty Revolt! Hide your Children!


 
 Reply 
 
Chaitanya Vasanthavada
Chaitanya Vasanthavada
17:26 Nov-15-2014
Re: About Epoch LTC
In Reply to David Hermanutz at 01:43 Aug-22-2008 .

No doubt that Epoch LTC is an excellent machine for UT. I am a bit confused in drawing DAC.
Can you explain the process of it.

 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window