where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1657 views
Technical Discussions
Anders
Anders
03:09 Jul-22-2008
About Epoch LTC

Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
Thanks.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:51 Jul-22-2008
Re: About Epoch LTC
The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.

As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.


----------- Start Original Message -----------
: Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
07:24 Jul-22-2008
Re: About Epoch LTC
I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...

Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen

Good luck

Joe

---------- Start Original Message -----------
: The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
:
: : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 850

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
850
00:50 Jul-23-2008
Re: About Epoch LTC
Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.

Cheerios,
Michel

----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 303

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
303
09:16 Jul-23-2008
Re: About Epoch LTC
In response to Joe's comments, I have had a "short play" with one of these instruments. I agree that the screen is a bit small, but it is designed to be a smaller and more portable version of the Epoch 4 and Epoch XT. If a bigger screen is needed, then the bigger instrument should be chosen.
Having said that, the "up to 50 DAC points" is a lot, but nobody is ever going to use that many.

Godfrey Hands
----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:43 Aug-22-2008
Re: About Epoch LTC
----------- Start Original Message -----------
: Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.
: Cheerios,
: Michel
: : I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: : Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: : Good luck
: : Joe
: : ---------- Start Original Message -----------
: : : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: : :
: : : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : : Thanks.
------------ End Original Message ------------

It's a Lefty Revolt! Hide your Children!


 
 Reply 
 
Chaitanya Vasanthavada
Chaitanya Vasanthavada
17:26 Nov-15-2014
Re: About Epoch LTC
In Reply to David Hermanutz at 01:43 Aug-22-2008 .

No doubt that Epoch LTC is an excellent machine for UT. I am a bit confused in drawing DAC.
Can you explain the process of it.

 
 Reply 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window