where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
393 views
Technical Discussions
Tino Volpe
Tino Volpe
01:34 Jan-06-1999
Surface roughness measurements

Hi everyone. I'm sorry that this is not related to this month's articles but I have a request. I am doing a study on the machinability of platinum and in order to quantify my results, I need to measure surface roughness. Does anyone know where I can rent an instrument for a short period of time to do this? I would appreciate any leads.

Thanks

Tino


 
 Reply 
 
Mark C. Malburg
Mark C. Malburg
03:36 Jan-07-2000
Re: Surface roughness measurements
EMI Gage
847-277-7511

Ask for Jeff, tell him I sent you!

- Mark

: Hi everyone. I'm sorry that this is not related to this month's articles but I have a request. I am doing a study on the machinability of platinum and in order to quantify my results, I need to measure surface roughness. Does anyone know where I can rent an instrument for a short period of time to do this? I would appreciate any leads.

: Thanks

: Tino




 
 Reply 
 
Phil Washburn
Phil Washburn
03:48 Mar-22-2000
Re: Surface roughness measurements
Hello,

I was wondering if anybody had a good estimation of the
roughness of wax. It is for my senior design project and
I would love it if anybody had a good guess. Thanks,

Phil Washburn
oredigger99@hotmail.com



 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window