where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

661 views
Technical Discussions
Warwick Leete
Warwick Leete
09:03 Aug-11-2008
COLD PIPE INSPECTIONS

Thermography is used for hot pipework to detect eroded areas, what is the best for chiller cold pipework in buildings?


 
 Reply 
 
Zack
R & D,
Malaysian Nuclear Agency, Malaysia, Joined Nov 2007, 8

Zack

R & D,
Malaysian Nuclear Agency,
Malaysia,
Joined Nov 2007
8
01:31 Aug-11-2008
Re: COLD PIPE INSPECTIONS
Please do not be confused with the term 'hot" or "cold" terminology. In IRT world hot or cold is the same thing since any object with above absolute temperature will produce heat. In this case, I would say, thermography also can be used for inspecting your chiller cold pipework as it also produce heat which will be captured by your IR imager (IR camera). Qualitatively, the thermogram (IR image) will show you something if there is any abnormal behaviour of the heat distribution ( or heat gradient)...




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window