where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
641 views
Technical Discussions
wang
wang
07:54 Aug-25-2008
who can tell me this formula's unit?

who can tell me this formula's unit?
N=V/£¨15.16F sin2(¦Ã)), { british standard [BS EN 12668-2:2001]}
N:nearfied length unit=?
V:sound velocity of the circular transducer unit=?
¦Ã:divergence unit=?
F:centre frequency unit=?
15.16: ?



 
 Reply 
 
Navita
Navita
00:32 Aug-25-2008
Re: who can tell me this formula's unit?
All dimensions for calculation are in mm for length/ distance, Hz for frequency and seconds for time.

----------- Start Original Message -----------
: who can tell me this formula's unit?
: N=V/£¨15.16F sin2(¦Ã)), { british standard [BS EN 12668-2:2001]}
: N:nearfied length unit=?
: V:sound velocity of the circular transducer unit=?
: ¦Ã:divergence unit=?
: F:centre frequency unit=?
: 15.16: ?
------------ End Original Message ------------




 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 179

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
179
06:27 Aug-25-2008
Re: who can tell me this formula's unit?
The explanations by Navita on equation A.1 of European Standard EN 12668-2 are correct.

If you use mm/s for velocity and cycles/s = Hz for frequency you get mm for the near field length. The factor 15.16 and sin2(gamma) are dimensionless.

Please note, that the velocity of the block is addressed, not the velocity of the transducer.

Udo Schlengermann
Convener CEN/TC138/WG2

----------- Start Original Message -----------
: who can tell me this formula's unit?
: N=V/£¨15.16F sin2(¦Ã)), { british standard [BS EN 12668-2:2001]}
: N:nearfied length unit=?
: V:sound velocity of the circular transducer unit=?
: ¦Ã:divergence unit=?
: F:centre frequency unit=?
: 15.16: ?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window