where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1295 views
Technical Discussions
Göran Vogt
Director,
Vogt Ultrasonics GmbH, Germany, Joined Nov 1998, 4

Göran Vogt

Director,
Vogt Ultrasonics GmbH,
Germany,
Joined Nov 1998
4
01:16 Mar-23-2000
PCMCI ultrasonic board

I´m searching for a simple ultrasonic ultrasonic pcmcia board for multi purpose use in a laptop. Who is developping and producing such a board. Please help.


 
 Reply 
 
James Dolfi
Director
ford, USA, Joined Oct 1999, 8

James Dolfi

Director
ford,
USA,
Joined Oct 1999
8
02:14 Mar-24-2000
Re: PCMCI ultrasonic board
: I´m searching for a simple ultrasonic ultrasonic pcmcia board for multi purpose use in a laptop. Who is developping and producing such a board. Please help.
Krautkramer uses pcmcia cards in their ultralog 2000. They may ba able to help.





 
 Reply 
 
Tadeusz Stepinski
R & D
Uppsala University, Sweden, Joined Nov 1998, 14

Tadeusz Stepinski

R & D
Uppsala University,
Sweden,
Joined Nov 1998
14
00:26 Mar-27-2000
Re: PCMCI ultrasonic board
: I´m searching for a simple ultrasonic ultrasonic pcmcia board for multi purpose use in a laptop. Who is developping and producing such a board. Please help.

As far as I know there are no complete instruments on PCMCIA boards available. However, there are instruments using laptop as a terminal and communicating via PCMCIA board. One of the best I know is that from Technology Design, GB.
Please look at http://www.technologydesign.com/ for details. You may contact them directly at tdndt@tdndt.ndirect.co.uk

Best regards

Tadeusz Stepinski




 
 Reply 
 
F. J. Dodd
F. J. Dodd
00:51 Mar-27-2000
PCMCIA card
: I´m searching for a simple ultrasonic ultrasonic pcmcia board for multi purpose use in a laptop. Who is developping and producing such a board. Please help.
Automated Inspection Systems, Inc. makes a 9 bit A/D PC (formerly PCMCIA) card used in notebook computer based UT systems.




 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
03:22 Apr-25-2000
Re: PCMCI ultrasonic board
I tried to reach the below mentioned webpage of technology design, but failed - you get into a ftp// - directory but get no access. Is this a very secret company????

: As far as I know there are no complete instruments on PCMCIA boards available. However, there are instruments using laptop as a terminal and communicating via PCMCIA board. One of the best I know is that from Technology Design, GB.
: Please look at http://www.technologydesign.com/ for details. You may contact them directly at tdndt@tdndt.ndirect.co.uk

: Best regards

: Tadeusz Stepinski




 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window