where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
525 views
Technical Discussions
John McCanna
John McCanna
06:56 Mar-28-2000
NDT Inspection of Prestressing Tendon Systems in Pressurized Concrete Containments

I am looking for an inspection process to determine cracking, corrosion, etc., of grouted prestressed tendons. The tendons consist of 19 x 0.62 inch diameter strands with access to the ends only.

Thank you


 
 Reply 
 
Gary Woodside
Gary Woodside
00:33 Mar-29-2000
Re: NDT Inspection of Prestressing Tendon Systems in Pressurized Concrete Containments
In the UK a 7.5m long 6mm dia videoscope is used for looking at the tendons of prestressed bridge supports in preperation for increasing the weight limit.

Tendons were failing through corrosion as incorrect grouting procedures were leaving the tendons exposed.

Regards

Gary

I am looking for an inspection process to determine cracking, corrosion, etc., of grouted prestressed tendons. The tendons consist of 19 x 0.62 inch diameter strands with access to the ends only.

: Thank you




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
03:59 Apr-26-2000
Re: NDT Inspection of Prestressing Tendon Systems in Pressurized Concrete Containments
Everest VIT has a video probe that would suit this application.

: In the UK a 7.5m long 6mm dia videoscope is used for looking at the tendons of prestressed bridge supports in preperation for increasing the weight limit.

: Tendons were failing through corrosion as incorrect grouting procedures were leaving the tendons exposed.

: Regards

: Gary

: I am looking for an inspection process to determine cracking, corrosion, etc., of grouted prestressed tendons. The tendons consist of 19 x 0.62 inch diameter strands with access to the ends only.

: : Thank you




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window