where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
Leading industrial companies around the world look for defects in their products using Volume Graphics software.

976 views
Technical Discussions
XiangYan
XiangYan
06:51 Sep-05-2008
coercive force

is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?



    
 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 829

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
829
07:24 Sep-05-2008
Re: coercive force
In one word, YES! The lower the L/D Ratio (Length to Diameter), greater is the Coercive Force required to demagnetise the item. But shape is not the only factor. You also have to take into account such properties as heat treatment and alloying.

Cheerio's
Michel

----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------




    
 
 
Catalin Mandache
Catalin Mandache
06:03 Sep-08-2008
Re: coercive force
The coercive force depends on so many micro structural factors that is very unlikely to have the same values for two identically shaped and alloyed samples.

----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------




    
 
 
David Mackintosh
Engineering,
Acuren Group Inc., Canada, Joined Feb 2011, 85

David Mackintosh

Engineering,
Acuren Group Inc.,
Canada,
Joined Feb 2011
85
09:36 Sep-23-2008
Re: coercive force
----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------

The coercive force, Hc, is the applied field required to demagnetize a material after saturation. It is a material property. (See for example http://www.ndt-ed.org/EducationResources/CommunityCollege/MagParticle/Physics/HysteresisLoop.htm and http://en.wikipedia.org/wiki/Coercive_force.) The magnetic H-field required to demagnetize a specific object depends on the material properties, the shape of the object, and the method of applying the field, among other things. Hc for the material and the demagnetizing force required for a specific object are related, but it is not always easy to calculate one from the other.

David



    
 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window