where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS
2497 views
Technical Discussions
Suresh
Suresh
07:04 Sep-22-2008
RT Back Scattering

Hi,
How does a letter B appears black in RT film, when it is placed at the back of film ?

I find some procedures mentioning,

"If a dark image "B" appears on a lighter background then this is not a cause for rejection"

thanks for replies,


Suresh


 
 Reply 
 
ezio
Other, Retired ex Laboratory Technical Manager
OMECO Research Centre, Italy, Joined Sep 2008, 273

ezio

Other, Retired ex Laboratory Technical Manager
OMECO Research Centre,
Italy,
Joined Sep 2008
273
07:44 Sep-22-2008
Re: RT Back Scattering
----------- Start Original Message -----------
: Hi,
: How does a letter B appears black in RT film, when it is placed at the back of film ?
: I find some procedures mentioning,
: "If a dark image "B" appears on a lighter background then this is not a cause for rejection"
: thanks for replies,
:
: Suresh
------------ End Original Message ------------

It is correct: if B appears darker, back scatterig radiation is irrelevant.


 
 Reply 
 
DJ Kallhof
DJ Kallhof
09:16 Sep-22-2008
Re: RT Back Scattering
The reason it shows up on the film dark is from scatter between the "B" itself and the film.
----------- Start Original Message -----------
: Hi,
: How does a letter B appears black in RT film, when it is placed at the back of film ?
: I find some procedures mentioning,
: "If a dark image "B" appears on a lighter background then this is not a cause for rejection"
: thanks for replies,
:
: Suresh
------------ End Original Message ------------




 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
00:57 Sep-23-2008
Re: RT Back Scattering - slight edit
Hi Suresh

A light image "B" on the film against a darker background means less radiation is reaching the film immediately under the "B" than is reaching the surrounding area. The lead letter is SHIELDING the film from scattered radiation from materials behind the film which lie in the radiation path. UNACCEPTABLE.

If the density of the surrounding film is less than that of the image of the "B", i.e. the "B" is a dark image against a lighter film background, then the scatter effect is weaker from the background than backscatter and/or emission from the lead "B". ACCEPTABLE.


Thoughtful set-up and use of lead sheet will minimise backscatter.

Good shooting.

Nigel

----------- Start Original Message -----------
: : Hi,
: : How does a letter B appears black in RT film, when it is placed at the back of film ?
: : I find some procedures mentioning,
: : "If a dark image "B" appears on a lighter background then this is not a cause for rejection"
: : thanks for replies,
::
: : Suresh
: It is correct: if B appears darker, back scatterig radiation is irrelevant.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window