where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1102 views
Technical Discussions
XiangYan
XiangYan
06:51 Sep-05-2008
coercive force

is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?



 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 868

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
868
07:24 Sep-05-2008
Re: coercive force
In one word, YES! The lower the L/D Ratio (Length to Diameter), greater is the Coercive Force required to demagnetise the item. But shape is not the only factor. You also have to take into account such properties as heat treatment and alloying.

Cheerio's
Michel

----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------




 
 Reply 
 
Catalin Mandache
Catalin Mandache
06:03 Sep-08-2008
Re: coercive force
The coercive force depends on so many micro structural factors that is very unlikely to have the same values for two identically shaped and alloyed samples.

----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------




 
 Reply 
 
David Mackintosh
Engineering,
Acuren Group Inc., Canada, Joined Feb 2011, 85

David Mackintosh

Engineering,
Acuren Group Inc.,
Canada,
Joined Feb 2011
85
09:36 Sep-23-2008
Re: coercive force
----------- Start Original Message -----------
: is the coercive force depend on the shape ? Provided two samples are made of the same material but different shape, you measure their coercive force could you end up with different results ?
------------ End Original Message ------------

The coercive force, Hc, is the applied field required to demagnetize a material after saturation. It is a material property. (See for example http://www.ndt-ed.org/EducationResources/CommunityCollege/MagParticle/Physics/HysteresisLoop.htm and http://en.wikipedia.org/wiki/Coercive_force.) The magnetic H-field required to demagnetize a specific object depends on the material properties, the shape of the object, and the method of applying the field, among other things. Hc for the material and the demagnetizing force required for a specific object are related, but it is not always easy to calculate one from the other.

David



 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window