where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
864 views
Technical Discussions
Micheal Park
R & D
Worltech R&D Center, South Korea, Joined Oct 1999, 5

Micheal Park

R & D
Worltech R&D Center,
South Korea,
Joined Oct 1999
5
00:39 Apr-25-2000
Ultrasonic inspection for car manufacturing

Dear Sir

I am researching new method for replace old testing method in car manufacturing.
In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
Does any one knows systems which is available to this appllication?
Any comment will be appreciated.
Thank you!




 
 Reply 
 
Trevor Easton
Engineering
Dofasco Inc, Canada, Joined Nov 1998, 13

Trevor Easton

Engineering
Dofasco Inc,
Canada,
Joined Nov 1998
13
03:35 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:
Take a look at http://www.epdtech.com/ultra/up100.htm for one example



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
04:11 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
SDT system will do this kind of thing very easily (some info on our web page http;//www.sonatest-plc.com)

You dont say where you are, so suggest you send me your details privately and I'll have someone contact you

Best Regards

Joe Buckley


: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:




 
 Reply 
 
N.Valliyappan David
Student, Research Assistant
National University of Malaysia, Malaysia, Joined Jan 2000, 4

N.Valliyappan David

Student, Research Assistant
National University of Malaysia,
Malaysia,
Joined Jan 2000
4
09:15 Apr-26-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

Dear Sir,

I believe Ultraprobe 9000 could be one of your solutions.
Please visit this site :
http://www.uesystems.com
for the product.




 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window