where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
859 views
Technical Discussions
Micheal Park
R & D
Worltech R&D Center, South Korea, Joined Oct 1999, 5

Micheal Park

R & D
Worltech R&D Center,
South Korea,
Joined Oct 1999
5
00:39 Apr-25-2000
Ultrasonic inspection for car manufacturing

Dear Sir

I am researching new method for replace old testing method in car manufacturing.
In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
Does any one knows systems which is available to this appllication?
Any comment will be appreciated.
Thank you!




 
 Reply 
 
Trevor Easton
Engineering
Dofasco Inc, Canada, Joined Nov 1998, 13

Trevor Easton

Engineering
Dofasco Inc,
Canada,
Joined Nov 1998
13
03:35 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:
Take a look at http://www.epdtech.com/ultra/up100.htm for one example



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
04:11 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
SDT system will do this kind of thing very easily (some info on our web page http;//www.sonatest-plc.com)

You dont say where you are, so suggest you send me your details privately and I'll have someone contact you

Best Regards

Joe Buckley


: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:




 
 Reply 
 
N.Valliyappan David
Student, Research Assistant
National University of Malaysia, Malaysia, Joined Jan 2000, 4

N.Valliyappan David

Student, Research Assistant
National University of Malaysia,
Malaysia,
Joined Jan 2000
4
09:15 Apr-26-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

Dear Sir,

I believe Ultraprobe 9000 could be one of your solutions.
Please visit this site :
http://www.uesystems.com
for the product.




 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window